List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
An individual demonstrating competency must satisfy all of the elements and performance criteria in this unit.
There must be evidence that the individual has inspected at least six trees, each with a client specified scope of works for access and tree work, and where:
at least 1 tree is inside the safe approach distance of power lines
at least 2 trees have defects and hazards that will require additional controls specified in the scope of works
at least 2 trees have defects and hazards that require a change in the work method specified in the scope of works
at least 1 tree is within the specifications for the scope of works.
There must also be evidence that the individual has for each of the six trees:
confirmed access to site and identified tree and scope of works
completed a job safety analysis documenting site-specific items including:
work health, safety and environmental hazards
risks that were not controlled by the organisational Safe Work Method Statement (SWMS)
risk control measures
identification of overhead and underground services and approach distances
use of personal protective equipment
inspected tree for structural defects, disease, insects, fauna and other considerations in trunk, roots and branches that may impact tree access or work
selected an appropriate tree access or tree work method, considering:
the scope of works required
site and tree hazards identified
limitations imposed by crew skill level and resources available
informed work team of hazards and control measures to implement during access and tree work
documented control measures, and tree access and work method according to workplace procedures
advised stakeholders where tree works were altered or rescheduled according to workplace procedures.
All tree inspection work is required to be performed according to preferred industry practices (as outlined in the Companion Volume).
An individual must be able to demonstrate the knowledge required to perform the tasks outlined in the elements and performance criteria of this unit. This includes knowledge of:
preferred industry practices (as outlined in the Companion Volume) for tree inspection work
the use of organisational policies, procedures and documents to conduct a site-specific job safety analysis
personal protective equipment when conducting tree inspections
workplace health, safety, site, environmental and traffic control measures
tree inspection methods and principles, including:
locating and identifying trees
tree inspection methodology
determination of location of above and below ground services
methods of identifying tree species
tree species and characteristics that impact on the selection of access to trees and undertaking tree works
selection of tree access and tree work methods that are appropriate for:
the scope of works required
site and tree hazards identified
limitations imposed by crew skill level and resources available
recognising limitations and identifying where risks will affect tree access and work methods, and prevent work
preparation and use of job safety analysis and/or safe work method statement (SWMS) when managing safety risk and local traffic
safety considerations and procedures when working near overhead power lines, including:
basics of electrocution
power line types and insulation
approach distances and safety zones, voltage and arching
authorisations to work near power lines
tools, equipment, tree loads, personnel and power line contact
legal liability
safety considerations and procedures when working near underground services, including:
underground power
gas lines
wire and optical fibre
water
damage and legal liabilities
safe work practices
conducting a hazard evaluation of trees and their surrounds
risk due to work site environment, including wind and weather conditions
risk due to condition of tree surrounds, including:
soil disturbance
trip hazards
excavations
other trees
foot and vehicle traffic
risk due to roots and trunk flare hazards, including:
movement
decay
mechanical damage
compromised structure
risk due to tree trunk and canopy hazards, including:
structural defects
decay
disease
cavities
swellings
aggressive insects and wildlife
integrity of attachment of limbs
hangers
presence of allergic plants or vines
ecological impediments to accessing trees, including:
insects and other fauna
habitat and hollows
field tests on trees to investigate extent of hazards, including:
load testing
probing cavities
testing hollows by sounding
documentation and reporting requirements relevant to tree inspections and communicating with clients.
Assessment of the skills in this unit of competency must take place under the following conditions:
physical conditions:
six trees as stipulated in the performance evidence
resources, equipment and materials:
personal protective equipment used for tree inspections
specifications:
legislation, regulations, codes of practice and standards relating to working near services and power lines
preferred industry practices (as outlined in the Companion Volume) for tree inspection work
documentation for planning and reporting tree inspection work
relationships:
work team.
Assessors of this unit must satisfy the requirements for assessors in applicable vocational education and training legislation, frameworks and/or standards. In particular, assessors must have:
arboriculture vocational competencies at least to the level being assessed
current arboriculture industry skills directly relevant to the unit of competency being assessed.