Assessor Resource

AHCMOM308
Operate broadacre and row crop harvest machinery and equipment

Assessment tool

Version 1.0
Issue Date: May 2024


This unit of competency describes the skills and knowledge required to operate broadacre or row crop harvesting machinery and equipment.

All work must be carried out to comply with workplace procedures, Work Health and Safety requirements manufacturer’s specifications and sustainability practices.

This unit applies to individuals who work under broad direction and take responsibility for their own work. They use discretion and judgement in the selection and use of available resources.

No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Element

Performance criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Prepare machinery for use

1.1 Identify and report potential work health and safety hazards

1.2 Conduct routine pre operational checks as described in operator manual

1.3 Replace and report damaged or worn components

1.4 Select and use appropriate personnel protective equipment

1.5 Attach ancillary equipment and check for correct operation

2. Operate machinery and equipment

2.1 Operate machinery and equipment in a safe, efficient and controlled manner

2.2 Operate machinery in accordance with task requirements and conditions

2.3 Monitor machinery performance and efficiency and make adjustments as required

2.4 Assess and minimise potential risks to self, others and the environment

3. Complete work

3.1 Follow shut down procedures

3.2 Perform routine operational servicing and minor maintenance

3.3 Identify and report malfunctions, faults, irregular performance or damage

3.4 Clean, secure and store machinery

3.5 Maintain machinery use records

The candidate must be observed operating agricultural or horticultural broadacre or row crop harvesting machinery and equipment.

The candidate must be assessed on their ability to integrate and apply the performance requirements of this unit in a workplace setting. Performance must be demonstrated consistently over time and in a suitable range of contexts.

The candidate must provide evidence that they can:

identify hazards and implement safe operating procedures

complete pre-operational checks

perform minor maintenance

recognise and report defects

operate machinery and equipment to industry standards

attach and detach associated equipment

use safe and environmentally responsible workplace practices

The candidate must demonstrate knowledge of:

manufacturer's requirements and workplace requirements for:

pre-operational checks

machinery operation techniques

operator level servicing

shutdown procedure

emergency procedures

basic diagnostic techniques

equipment characteristics, technical capabilities and limitations

components and controls features and functions

relevant work health and safety and environmental legislation, Codes of Practice and enterprise requirements

Competency is to be assessed in the workplace or simulated environment that accurately reflects performance in a real workplace setting. All evidence collected must meet minimum requirements including industry standard timeframes for performance of tasks.

Assessors must satisfy current standards for RTOs.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Element

Performance criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Prepare machinery for use

1.1 Identify and report potential work health and safety hazards

1.2 Conduct routine pre operational checks as described in operator manual

1.3 Replace and report damaged or worn components

1.4 Select and use appropriate personnel protective equipment

1.5 Attach ancillary equipment and check for correct operation

2. Operate machinery and equipment

2.1 Operate machinery and equipment in a safe, efficient and controlled manner

2.2 Operate machinery in accordance with task requirements and conditions

2.3 Monitor machinery performance and efficiency and make adjustments as required

2.4 Assess and minimise potential risks to self, others and the environment

3. Complete work

3.1 Follow shut down procedures

3.2 Perform routine operational servicing and minor maintenance

3.3 Identify and report malfunctions, faults, irregular performance or damage

3.4 Clean, secure and store machinery

3.5 Maintain machinery use records

The candidate must be observed operating agricultural or horticultural broadacre or row crop harvesting machinery and equipment.

The candidate must be assessed on their ability to integrate and apply the performance requirements of this unit in a workplace setting. Performance must be demonstrated consistently over time and in a suitable range of contexts.

The candidate must provide evidence that they can:

identify hazards and implement safe operating procedures

complete pre-operational checks

perform minor maintenance

recognise and report defects

operate machinery and equipment to industry standards

attach and detach associated equipment

use safe and environmentally responsible workplace practices

The candidate must demonstrate knowledge of:

manufacturer's requirements and workplace requirements for:

pre-operational checks

machinery operation techniques

operator level servicing

shutdown procedure

emergency procedures

basic diagnostic techniques

equipment characteristics, technical capabilities and limitations

components and controls features and functions

relevant work health and safety and environmental legislation, Codes of Practice and enterprise requirements

Competency is to be assessed in the workplace or simulated environment that accurately reflects performance in a real workplace setting. All evidence collected must meet minimum requirements including industry standard timeframes for performance of tasks.

Assessors must satisfy current standards for RTOs.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Identify and report potential work health and safety hazards 
Conduct routine pre operational checks as described in operator manual 
Replace and report damaged or worn components 
Select and use appropriate personnel protective equipment 
Attach ancillary equipment and check for correct operation 
Operate machinery and equipment in a safe, efficient and controlled manner 
Operate machinery in accordance with task requirements and conditions 
Monitor machinery performance and efficiency and make adjustments as required 
Assess and minimise potential risks to self, others and the environment 
Follow shut down procedures 
Perform routine operational servicing and minor maintenance 
Identify and report malfunctions, faults, irregular performance or damage 
Clean, secure and store machinery 
Maintain machinery use records 

Forms

Assessment Cover Sheet

AHCMOM308 - Operate broadacre and row crop harvest machinery and equipment
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AHCMOM308 - Operate broadacre and row crop harvest machinery and equipment

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: