List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Element | Performance criteria |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Prepare machinery for use | 1.1 Identify and report potential work health and safety hazards 1.2 Conduct routine pre operational checks as described in operator manual 1.3 Replace and report damaged or worn components 1.4 Select and use appropriate personnel protective equipment 1.5 Attach ancillary equipment and check for correct operation |
2. Operate machinery and equipment | 2.1 Operate machinery and equipment in a safe, efficient and controlled manner 2.2 Operate machinery in accordance with task requirements and conditions 2.3 Monitor machinery performance and efficiency and make adjustments as required 2.4 Assess and minimise potential risks to self, others and the environment |
3. Complete work | 3.1 Follow shut down procedures 3.2 Perform routine operational servicing and minor maintenance 3.3 Identify and report malfunctions, faults, irregular performance or damage 3.4 Clean, secure and store machinery 3.5 Maintain machinery use records |
The candidate must be observed operating agricultural or horticultural broadacre or row crop harvesting machinery and equipment.
The candidate must be assessed on their ability to integrate and apply the performance requirements of this unit in a workplace setting. Performance must be demonstrated consistently over time and in a suitable range of contexts.
The candidate must provide evidence that they can:
identify hazards and implement safe operating procedures
complete pre-operational checks
perform minor maintenance
recognise and report defects
operate machinery and equipment to industry standards
attach and detach associated equipment
use safe and environmentally responsible workplace practices
The candidate must demonstrate knowledge of:
manufacturer's requirements and workplace requirements for:
pre-operational checks
machinery operation techniques
operator level servicing
shutdown procedure
emergency procedures
basic diagnostic techniques
equipment characteristics, technical capabilities and limitations
components and controls features and functions
relevant work health and safety and environmental legislation, Codes of Practice and enterprise requirements
Competency is to be assessed in the workplace or simulated environment that accurately reflects performance in a real workplace setting. All evidence collected must meet minimum requirements including industry standard timeframes for performance of tasks.
Assessors must satisfy current standards for RTOs.