List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Element | Performance criteria |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Plan and prepare for work | 1.1 Identify work plans and clarify with supervisor 1.2 Select and carry out pre-operational and safety checks on tools, equipment and machinery 1.3 Identify work health and safety hazards, assess risks and implement suitable controls 1.4 Select, use and maintain suitable safety and personal protective equipment |
2. Monitor water treatment plant performance | 2.1 Conduct routine inspections of treatment equipment 2.2 Collect water samples and conduct standard tests or send samples for analysis where required by the biosecurity and food safety codes 2.3 Collect data on treatment process and record and report in appropriate manner |
3. Control chemical use | 3.1 Use, handle and store chemicals appropriately 3.2 Prepare chemical dosing 3.3 Maintain information related to chemical supply and usage |
4. Operate and control water treatment processes | 4.1 Monitor water and waste water treatment processes to maintain parameters of operation 4.2 Identify and report process faults and operational conditions of treatment equipment 4.3 Initiate basic equipment and process adjustments to enhance performance |
5. Complete work | 5.1 Compile reports from equipment and water treatment processes 5.2 Clean and store tools and equipment |
The candidate must be assessed on their ability to integrate and apply the performance requirements of this unit in a workplace setting. Performance must be demonstrated consistently over time and in a suitable range of contexts.
The candidate must provide evidence that they can:
identify adverse environmental impacts of irrigation activities and appropriate remedial action
identify control system faults
identify hazards and implement safe work procedures
prepare and apply chemical dosing
use water sampling and testing techniques
The candidate must demonstrate knowledge of:
principles and practices for monitoring and operating water treatment processes
chemical dosing processes
environmental impacts of irrigation using water from any ground or underground source
environmental issues associated with water treatment
hazardous materials handling
water quality monitoring methods and techniques
water treatment and water filtration techniques
work health and safety procedures relating to the operation of machinery and the use of chemicals
Assessors must satisfy current standards for RTOs.