List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Element | Performance criteria |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Plan for collection of samples | 1.1 Confirm the purpose and scope of sample collection activity from discussion with supervisor or work instructions 1.2 Confirm the sample collection schedule with supervisor 1.3 Confirm the sampling site location and gain approval for site access where required 1.4 Identify the samples to be collected and preserved with supervisor 1.5 Assess the range of likely operating conditions, hazards and difficult or sensitive environments for impact on sampling and testing |
2. Prepare equipment and resources | 2.1 Source equipment required for sampling and preserving as outlined in sampling procedures 2.2 Check equipment for availability and serviceability 2.3 Select and use appropriate personal protective equipment 2.4 Collect data or record sheets or books for use 2.5 Move equipment, data sheets and personnel to sampling sites and prepare for use 2.6 Apply safe work practices at all times |
3. Carry out sampling and preserving procedures | 3.1 Collect samples as outlined in sampling plan 3.2 Preserve and record samples 3.3 Prepare and package samples for external analysis in line with laboratory standards and send to laboratory 3.4 Package and transport hazardous materials appropriately 3.5 Make observations including information on the surrounding area and environmental conditions 3.6 Report and deliver collection outcomes including presentation of samples |
4. Complete sample collection activities | 4.1 Clean, sanitise and store equipment and clothing 4.2 Repair damaged or malfunctioning equipment on site or sent to manufacturer or specialist 4.3 Record sampling results and observations on data sheets and forward to appropriate person 4.4 Advise supervisor of changes in field conditions and equipment |
The candidate must be assessed on their ability to integrate and apply the performance requirements of this unit in a workplace setting. Performance must be demonstrated consistently over time and in a suitable range of contexts.
The candidate must provide evidence that they can:
plan for collection of samples and moving equipment to the site
collect and preserve samples for a given site
record sampling results and observations on data sheets
carry out sampling procedures
distinguish atypical circumstances
prepare samples
package samples for transport to laboratory
use and operate relevant tools and equipment
use industry standard terminology.
The candidate must demonstrate knowledge of:
hydrological cycle
field procedures for sampling and preservation
collecting equipment and methods
preservation equipment and processes
basic habitat assessment
water quality issues
fauna and flora recognition relevant to sampling activities
topographical, climatic or environmental influence on material or sampling procedure.
Assessors must satisfy current standards for RTOs.