List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Element | Performance criteria |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Open paunch | 1.1 Open paunch to empty all contents 1.2 Open paunch in accordance with workplace and health and safety requirements 1.3 Open paunch to ensure paunch products remain intact |
2. Empty paunch contents | 2.1 Empty paunch of any contents in accordance with workplace requirements |
3. Clean paunch | 3.1 Clean paunch to workplace requirements to prevent cross-contamination 3.2 Wash and pack paunch products |
4. Remove relevant parts | 4.1 Trim paunch to cutting lines in accordance with work instructions 4.2 Trim parts of fat as required |
5. Wash paunch | 5.1 Wash paunch in accordance with work instructions 5.2 Dispose of waste safely in accordance with work instructions |
6. Work safely in paunch processing area | 6.1 Process paunch in accordance with workplace health and safety requirements |
The candidate must empty, clean and prepare the paunch for further processing.
The candidate must:
apply workplace health and safety and workplace requirements related to processing of the paunch
follow work instructions to process paunch
use mechanical aids where applicable
report faults in mechanical aids in accordance with workplace requirements
apply relevant regulatory requirements
use communication skills relevant to work instructions and Standard Operating Procedures (SOPs)
The candidate must demonstrate a basic factual, technical and procedural knowledge of:
quality requirements and specifications for paunches
uses of the paunch
work instructions for the paunch processing area
relevant regulatory requirements
workplace health and safety hazards and requirements for paunch processing area
Assessment must be conducted in an operating abattoir or knackery.
Competency must be demonstrated at the usual speed of production.
As a minimum, the following three forms of assessment must be used:
quiz of underpinning knowledge
workplace demonstration
workplace referee or third-party report of performance over time
Assessors must satisfy the current standards for RTOs.