AURHTX001 - Diagnose and repair heavy vehicle manual transmissions
Assessor Resource
AURHTX001 Diagnose and repair heavy vehicle manual transmissions
Assessment tool
Version 1.0 Issue Date: June 2024
This unit describes the performance outcomes required to diagnose and repair faults in the manual transmissions of heavy vehicles. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation.
It applies to those working in the automotive service and repair industry. The manual transmissions include those in agricultural machinery, heavy commercial vehicles or mobile plant machinery.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to diagnose and repair heavy vehicle manual transmission
1.1 Job requirements are determined from workplace instructions
1.2 Diagnostic information is sourced and interpreted
1.3 Diagnostic options are analysed and those most appropriate to the circumstances are selected
1.4 Hazards associated with the work are identified and risks are managed
1.5 Diagnostic tools and equipment are selected and checked for serviceability
2. Diagnose manual transmission
2.1 Diagnostic tests are carried out according to manufacturer specifications, workplace procedures, and environmental and safety requirements
2.2 Faults are identified from diagnostic test results and causes of faults are determined
2.3 Diagnosis findings, including recommendations for necessary repairs or adjustments, are reported according to workplace procedures
3. Repair manual transmission
3.1 Repair information is sourced and interpreted
3.2 Repair options are analysed and those most appropriate to the circumstances are selected
3.3 Repair tools, equipment and materials are selected and checked according to manufacturer procedures
3.4 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
3.5 Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified
4. Complete work processes
4.1 Final inspection is made to ensure work is to workplace expectations and vehicle or transmission is presented ready for use
4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
4.3 Tools and equipment are checked and stored according to workplace procedures
4.4 Workplace documentation is processed according to workplace procedures
Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
disassemble and reassemble one heavy vehicle manual transmission that has a minimum of 9 speeds.
diagnose and repair a fault in three of the following components of a heavy vehicle manual transmission:
input shaft
gear shift mechanisms
gears and shafts
transmission bearings
auxiliary section and controls
gasket and seal leaks
remove, refit or replace a heavy vehicle manual transmission.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to diagnosing and repairing heavy vehicle transmissions, including procedures for:
using transmission lifting and supporting equipment
manual handling heavy vehicle manual transmissions
environmental requirements, including procedures for trapping, storing and disposing of clutch dust, brake fluid and oils released from manual transmissions
operating principles of heavy vehicle manual transmissions and associated components, including:
gears, including:
gear types
gear ratios and torque reduction and multiplication
simple gear trains
compound gear trains
application, purpose and operation of heavy vehicle manual transmissions and components, including:
power flows, including:
longitudinal manual transmissions
transfer cases
synchromesh operation
gearshift mechanisms, including:
mechanical
air
electrical/pneumatic
electronically automated manual transmissions
transfer cases
power take-off
diagnostic testing procedures for heavy vehicle manual transmissions, including:
abnormal noise diagnosis
electronic diagnosis
shift diagnosis
dismantling procedures for heavy vehicle manual transmissions, including:
measuring clearances and tolerances
inspecting components
repair procedures for heavy vehicle manual transmissions, including:
gears, shafts and bearings
electronic control systems
gear shift mechanism
post-repair testing procedures for heavy vehicle manual transmissions.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the trailer electronically controlled roll stability systems that they have worked on, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive repair workplace or simulated workplace
workplace instructions
manufacturer manual transmission specifications
one heavy vehicle with faults in its manual transmission that has a minimum of 9 speeds
diagnostic equipment for heavy vehicle manual transmissions
tools, equipment and materials appropriate for repairing and adjusting heavy vehicle manual transmissions.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to diagnose and repair heavy vehicle manual transmission
1.1 Job requirements are determined from workplace instructions
1.2 Diagnostic information is sourced and interpreted
1.3 Diagnostic options are analysed and those most appropriate to the circumstances are selected
1.4 Hazards associated with the work are identified and risks are managed
1.5 Diagnostic tools and equipment are selected and checked for serviceability
2. Diagnose manual transmission
2.1 Diagnostic tests are carried out according to manufacturer specifications, workplace procedures, and environmental and safety requirements
2.2 Faults are identified from diagnostic test results and causes of faults are determined
2.3 Diagnosis findings, including recommendations for necessary repairs or adjustments, are reported according to workplace procedures
3. Repair manual transmission
3.1 Repair information is sourced and interpreted
3.2 Repair options are analysed and those most appropriate to the circumstances are selected
3.3 Repair tools, equipment and materials are selected and checked according to manufacturer procedures
3.4 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
3.5 Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified
4. Complete work processes
4.1 Final inspection is made to ensure work is to workplace expectations and vehicle or transmission is presented ready for use
4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
4.3 Tools and equipment are checked and stored according to workplace procedures
4.4 Workplace documentation is processed according to workplace procedures
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Safety requirements must include:
work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:
using transmission lifting and supporting equipment
manual handling heavy vehicle manual transmissions.
Environmental requirements must include:
procedures for trapping, storing and disposing of clutch dust, brake fluid and oils released from manual transmissions.
Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
disassemble and reassemble one heavy vehicle manual transmission that has a minimum of 9 speeds.
diagnose and repair a fault in three of the following components of a heavy vehicle manual transmission:
input shaft
gear shift mechanisms
gears and shafts
transmission bearings
auxiliary section and controls
gasket and seal leaks
remove, refit or replace a heavy vehicle manual transmission.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to diagnosing and repairing heavy vehicle transmissions, including procedures for:
using transmission lifting and supporting equipment
manual handling heavy vehicle manual transmissions
environmental requirements, including procedures for trapping, storing and disposing of clutch dust, brake fluid and oils released from manual transmissions
operating principles of heavy vehicle manual transmissions and associated components, including:
gears, including:
gear types
gear ratios and torque reduction and multiplication
simple gear trains
compound gear trains
application, purpose and operation of heavy vehicle manual transmissions and components, including:
power flows, including:
longitudinal manual transmissions
transfer cases
synchromesh operation
gearshift mechanisms, including:
mechanical
air
electrical/pneumatic
electronically automated manual transmissions
transfer cases
power take-off
diagnostic testing procedures for heavy vehicle manual transmissions, including:
abnormal noise diagnosis
electronic diagnosis
shift diagnosis
dismantling procedures for heavy vehicle manual transmissions, including:
measuring clearances and tolerances
inspecting components
repair procedures for heavy vehicle manual transmissions, including:
gears, shafts and bearings
electronic control systems
gear shift mechanism
post-repair testing procedures for heavy vehicle manual transmissions.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the trailer electronically controlled roll stability systems that they have worked on, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive repair workplace or simulated workplace
workplace instructions
manufacturer manual transmission specifications
one heavy vehicle with faults in its manual transmission that has a minimum of 9 speeds
diagnostic equipment for heavy vehicle manual transmissions
tools, equipment and materials appropriate for repairing and adjusting heavy vehicle manual transmissions.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Job requirements are determined from workplace instructions
Diagnostic information is sourced and interpreted
Diagnostic options are analysed and those most appropriate to the circumstances are selected
Hazards associated with the work are identified and risks are managed
Diagnostic tools and equipment are selected and checked for serviceability
Diagnostic tests are carried out according to manufacturer specifications, workplace procedures, and environmental and safety requirements
Faults are identified from diagnostic test results and causes of faults are determined
Diagnosis findings, including recommendations for necessary repairs or adjustments, are reported according to workplace procedures
Repair information is sourced and interpreted
Repair options are analysed and those most appropriate to the circumstances are selected
Repair tools, equipment and materials are selected and checked according to manufacturer procedures
Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified
Final inspection is made to ensure work is to workplace expectations and vehicle or transmission is presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
Tools and equipment are checked and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Job requirements are determined from workplace instructions
Diagnostic information is sourced and interpreted
Diagnostic options are analysed and those most appropriate to the circumstances are selected
Hazards associated with the work are identified and risks are managed
Diagnostic tools and equipment are selected and checked for serviceability
Diagnostic tests are carried out according to manufacturer specifications, workplace procedures, and environmental and safety requirements
Faults are identified from diagnostic test results and causes of faults are determined
Diagnosis findings, including recommendations for necessary repairs or adjustments, are reported according to workplace procedures
Repair information is sourced and interpreted
Repair options are analysed and those most appropriate to the circumstances are selected
Repair tools, equipment and materials are selected and checked according to manufacturer procedures
Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified
Final inspection is made to ensure work is to workplace expectations and vehicle or transmission is presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
Tools and equipment are checked and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Forms
Assessment Cover Sheet
AURHTX001 - Diagnose and repair heavy vehicle manual transmissions
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURHTX001 - Diagnose and repair heavy vehicle manual transmissions
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent