AURKTJ011 - Remove, inspect and fit earthmoving and off-the-road tyres
Assessor Resource
AURKTJ011 Remove, inspect and fit earthmoving and off-the-road tyres
Assessment tool
Version 1.0 Issue Date: May 2024
This unit describes the performance outcomes required to remove, inspect and fit earthmoving and off-the-road (OTR) tyres to construction and mining vehicles. It involves removing the tyre from the rim, identifying and controlling risks, inspecting the tyre, assembling the wheel and rim, recommending required repair action, inflation, deflation, and preparing the tyre, wheel and rim assembly for use or storage.
It applies to those who fit tyres to wheel and rim assemblies of not less than 600 mm (24 inches) nominal diameter.
Licensing, legislative, regulatory, Australian standards or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.
Safety requirements must include:
those prescribed under applicable standards, WHS Acts and regulations, and workplace policies and procedures
isolation procedures
hazard control
manual-handling techniques
personal protective clothing and equipment
using tools and equipment
working with hazardous substances, including:
nitrogen gas
chemicals
hydraulic pressure
compressed air
polyurethane resin (PUR) tyre fill
tyre additive
Tools and equipment must include:
tyre handling equipment
bead breakers
rim and wheel assembly stands
inspection stands
hand tools
inflation and deflation tools and pressure gauges
lock ring catcher
mufflers
pneumatic tools
hydraulic tools
power tools
soft face hammers
support stands or jacks
torque tools
tyre levers
wire brushes
air compressors
gauges
Hazardous conditions must include:
changing and unstable ground conditions
dust
sparks from use of grinders
hard, soft or uneven ground conditions
line of fire during inflation of tyre, wheel or rim assembly
noise
vehicles/pedestrians/machinery/other personnel within the workplace
handling of tyres, rim components and assemblies
Hazardous tyre and wheel or rim conditions must include:
damage
wear
corrosion
foreign material
cracks
heat damage, including pyrolysis
compatibility of rim components
hazardous fill substances, including nitrogen gas, calcium chloride and polyurethane resin (PUR)
under- or over-inflated tyre
Rim and wheel component assemblies must include:
adaptor rings and plates
bolts
cleats
nuts
reducers
spacer bands
studs
washers
wedge bands
wedges
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Identify and control hazardous conditions in the work environment
Identify and apply safety requirements to control hazardous tyre, wheel and rim assembly conditions, noting points where safety checks are required
Obtain and interpret emergency procedures and be prepared for fires, accidents and emergencies
Identify hazards and environmental issues, assess potential risks, and implement control measures in line with workplace policies
Obtain and interpret manufacturer procedures original equipment manufacturer (OEM) specifications, workplace procedures, and applicable standards for earthmoving and off-the-road tyres
Obtain, interpret, clarify and confirm work requirements
Plan sequence of work, noting points where safety checks are required
Select and wear personal protective equipment required for the work activity
Coordinate and communicate planned activities with others at the site as per work requirements
Identify tyre, wheel and rim components
Select and inspect tools and equipment according to manufacturer instructions and workplace procedures
Prepare, clean and inspect tyre, wheel and rim assembly for damage, wear, corrosion, foreign material, cracks, and compatibility of component
Isolate, jack, raise and support vehicle according to workplace procedures
Deflate tyre according to manufacturer instructions and workplace procedures
Verify appropriate deflation of tyre in line with workplace procedures and OEM requirements
Apply workplace procedures for the safe removal and purging of hazardous fill substances
Remove tyre according to workplace procedures and without causing component damage or injury
Clean and visually inspect tyre, wheel or rim for serviceability and compatibility for application according to workplace procedures and OEM specifications
Record and report inspection findings according to workplace procedures
Document recommended repair and replacement actions and report to relevant personnel according to workplace procedures
Access and interpret workplace procedures and OEM specifications for fitting tyres
Assess need for tyre additive and nitrogen and add where required
Fit tyre according to workplace and manufacturer procedures
Perform post-fit inspections of tyre, wheel and rim assembly according to workplace procedures to confirm correct assembly, component compatibility, serviceability, and correct seating of components prior to inflation
Identify and apply tyre inflation safety procedures
Inflate tyre for transport, storage or use according to workplace procedures and manufacturer specifications
Monitor tyre, wheel and rim assembly during inflation according to workplace procedures
Perform final inspection to ensure work meets workplace requirements and OEM requirements
Prepare tyre, wheel and rim assembly for use or storage according to workplace procedures
Inspect and store tools and equipment according to workplace procedures, tagging or reporting where necessary
Complete workplace documentation according to workplace procedures
Forms
Assessment Cover Sheet
AURKTJ011 - Remove, inspect and fit earthmoving and off-the-road tyres
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURKTJ011 - Remove, inspect and fit earthmoving and off-the-road tyres
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent