AURMTA005 - Perform pit lane and service area operations at motor sport events
Assessor Resource
AURMTA005 Perform pit lane and service area operations at motor sport events
Assessment tool
Version 1.0 Issue Date: June 2024
This unit describes the performance outcomes required to perform pit lane and service area operations within the time constraints of motor sport events. It involves preparing for the task, following safety procedures, and carrying out repairs, adjustments and service work on competition vehicles during pit lane, pit bay or service area stops.
It applies to those working in the motor sport industry.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare for work
1.1 Job requirements are determined from event information
1.2 Tools and equipment are selected and checked for serviceability
1.3 Hazards associated with the work are identified and risks are managed
1.4 Equipment and tooling are positioned to ensure clear movement paths
1.5 Work area is cleaned and laid out for job requirements
2. Follow pit lane and service area safety procedures
2.1 Jacks and other lifting devices, including lifting lock-outs, are fitted prior to underbody servicing
2.2 Fire hazard and prevention procedures are followed according to team procedures or event category rules and supplementary regulations
2.3 Pit lane and service area signals are used according to team procedures, and event category rules and supplementary regulations
2.4 Access to pit lane or service area and walkways by non-team members is monitored according to team procedures
3. Carry out pit stop repairs and adjustments on competition vehicle
3.1 Pit stop is initiated and competition vehicle components are checked according to team pit stop or service area schedule
3.2 Minor adjustments, emergency repairs, and component replacements are performed according to team instructions and safety and environmental requirements
3.3 Work practices and pit stop or service area procedures are modified to manage contingency issues
3.4 Problems are reported to team members according to workplace procedures
4. Conduct post-stop clean-up
4.1 Tools and equipment are prepared and positioned ready for next vehicle stop
4.2 Surplus components and consumables are tagged and stored
4.3 Spillages are cleaned and waste is disposed of according to environmental requirements
4.4 Team and event documentation is completed according to team procedures
Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
perform pit lane and service area operations on a competition vehicle at two different motor sport events, including at one sanctioned motor sport event.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to performing pit lane and service area operations, including procedures for:
selecting and using personal protective equipment (PPE)
identifying acceptable tolerance levels for noise, heat and fumes
following pit lane and service area safety procedures
environmental requirements, including procedures for trapping, storing and disposing of fluids and contaminants released during pit lane and service area operations
key requirements of controlling body rules, category rules and supplementary regulations relating to above motor sport event
procedures for pit lane and service area operations, including:
layout at an event
preparation processes
pit stop and service area sequence and conduct
pit lane and service area signals and communication techniques
emergency repair methods and procedures
procedures for reporting equipment faults and component defects
procedures for completing event records.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the pit lane and service area operations they have performed at motor sport events, e.g. work order.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
two different motor sport events, including one sanctioned motor sport event
controlling body rules, category rules and supplementary regulations for the motor sport event
personal and motor sport team safety procedures and requirements, including PPE
motor sport team procedures and instructions
one competition vehicle
tools, equipment and service materials appropriate for performing pit lane and service area operations on competition vehicles.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare for work
1.1 Job requirements are determined from event information
1.2 Tools and equipment are selected and checked for serviceability
1.3 Hazards associated with the work are identified and risks are managed
1.4 Equipment and tooling are positioned to ensure clear movement paths
1.5 Work area is cleaned and laid out for job requirements
2. Follow pit lane and service area safety procedures
2.1 Jacks and other lifting devices, including lifting lock-outs, are fitted prior to underbody servicing
2.2 Fire hazard and prevention procedures are followed according to team procedures or event category rules and supplementary regulations
2.3 Pit lane and service area signals are used according to team procedures, and event category rules and supplementary regulations
2.4 Access to pit lane or service area and walkways by non-team members is monitored according to team procedures
3. Carry out pit stop repairs and adjustments on competition vehicle
3.1 Pit stop is initiated and competition vehicle components are checked according to team pit stop or service area schedule
3.2 Minor adjustments, emergency repairs, and component replacements are performed according to team instructions and safety and environmental requirements
3.3 Work practices and pit stop or service area procedures are modified to manage contingency issues
3.4 Problems are reported to team members according to workplace procedures
4. Conduct post-stop clean-up
4.1 Tools and equipment are prepared and positioned ready for next vehicle stop
4.2 Surplus components and consumables are tagged and stored
4.3 Spillages are cleaned and waste is disposed of according to environmental requirements
4.4 Team and event documentation is completed according to team procedures
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Event information must include:
team instructions
event category rules and supplementary regulations, including allowable configuration, quality, equipment and quantities.
Safety and environmental requirements must include:
work health and safety (WHS) and occupational health and safety (OHS) requirements, including:
selecting and using personal protective equipment (PPE)
identifying acceptable tolerance levels for noise, heat and fumes
following pit lane and service area safety procedures
environmental requirements, including procedures for trapping, storing and disposing of fluids and contaminants released during pit lane and service area operations.
Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
perform pit lane and service area operations on a competition vehicle at two different motor sport events, including at one sanctioned motor sport event.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to performing pit lane and service area operations, including procedures for:
selecting and using personal protective equipment (PPE)
identifying acceptable tolerance levels for noise, heat and fumes
following pit lane and service area safety procedures
environmental requirements, including procedures for trapping, storing and disposing of fluids and contaminants released during pit lane and service area operations
key requirements of controlling body rules, category rules and supplementary regulations relating to above motor sport event
procedures for pit lane and service area operations, including:
layout at an event
preparation processes
pit stop and service area sequence and conduct
pit lane and service area signals and communication techniques
emergency repair methods and procedures
procedures for reporting equipment faults and component defects
procedures for completing event records.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the pit lane and service area operations they have performed at motor sport events, e.g. work order.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
two different motor sport events, including one sanctioned motor sport event
controlling body rules, category rules and supplementary regulations for the motor sport event
personal and motor sport team safety procedures and requirements, including PPE
motor sport team procedures and instructions
one competition vehicle
tools, equipment and service materials appropriate for performing pit lane and service area operations on competition vehicles.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Job requirements are determined from event information
Tools and equipment are selected and checked for serviceability
Hazards associated with the work are identified and risks are managed
Equipment and tooling are positioned to ensure clear movement paths
Work area is cleaned and laid out for job requirements
Jacks and other lifting devices, including lifting lock-outs, are fitted prior to underbody servicing
Fire hazard and prevention procedures are followed according to team procedures or event category rules and supplementary regulations
Pit lane and service area signals are used according to team procedures, and event category rules and supplementary regulations
Access to pit lane or service area and walkways by non-team members is monitored according to team procedures
Pit stop is initiated and competition vehicle components are checked according to team pit stop or service area schedule
Minor adjustments, emergency repairs, and component replacements are performed according to team instructions and safety and environmental requirements
Work practices and pit stop or service area procedures are modified to manage contingency issues
Problems are reported to team members according to workplace procedures
Tools and equipment are prepared and positioned ready for next vehicle stop
Surplus components and consumables are tagged and stored
Spillages are cleaned and waste is disposed of according to environmental requirements
Team and event documentation is completed according to team procedures
Job requirements are determined from event information
Tools and equipment are selected and checked for serviceability
Hazards associated with the work are identified and risks are managed
Equipment and tooling are positioned to ensure clear movement paths
Work area is cleaned and laid out for job requirements
Jacks and other lifting devices, including lifting lock-outs, are fitted prior to underbody servicing
Fire hazard and prevention procedures are followed according to team procedures or event category rules and supplementary regulations
Pit lane and service area signals are used according to team procedures, and event category rules and supplementary regulations
Access to pit lane or service area and walkways by non-team members is monitored according to team procedures
Pit stop is initiated and competition vehicle components are checked according to team pit stop or service area schedule
Minor adjustments, emergency repairs, and component replacements are performed according to team instructions and safety and environmental requirements
Work practices and pit stop or service area procedures are modified to manage contingency issues
Problems are reported to team members according to workplace procedures
Tools and equipment are prepared and positioned ready for next vehicle stop
Surplus components and consumables are tagged and stored
Spillages are cleaned and waste is disposed of according to environmental requirements
Team and event documentation is completed according to team procedures
Forms
Assessment Cover Sheet
AURMTA005 - Perform pit lane and service area operations at motor sport events
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURMTA005 - Perform pit lane and service area operations at motor sport events
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent