- AURV230449A - Apply paint touch-up techniques
Assessor Resource
AURV230449A
Apply paint touch-up techniques
Assessment tool
Version 1.0
Issue Date: June 2024
The unit includes identification and confirmation of work requirements, preparation for work, preparation of equipment for application of material for paint touch-up, and completion of work finalisation processes, including clean-up and documentation.
Work requires individuals to demonstrate judgement and problem-solving skills in managing own work activities and contributing to a productive team environment.
Work is carried out in accordance with award provisions.
This unit of competency covers the skills and knowledge required to prepare equipment and apply materials for paint touch-up or minor repairs.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Employability Skills
This unit contains employability skills.
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | It is essential that competence is fully observed and there is ability to transfer competence to changing circumstances and to respond to unusual situations in the critical aspects of: observing safety procedures and requirements communicating effectively with others involved in or affected by the work selecting methods and techniques appropriate to the circumstances completing preparatory activity in a systematic manner preparing a range of equipment preparing a range of materials the completion of touch-up painting for a range of circumstances, including the use of spray equipment and brushes applying a range of touch-up materials. |
Context of, and specific resources for assessment | Application of competence is to be assessed in the workplace or simulated worksite. Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints. Assessment is to comply with regulatory requirements, including Australian standards. The following resources should be made available: workplace location or simulated workplace material relevant to the preparation and use of equipment and material for paint touch-up techniques equipment, hand and power tooling appropriate to the preparation and use of equipment and material for paint touch-up techniques activities covering mandatory task requirements specifications and work instructions. |
Method of assessment | Assessment must satisfy the endorsed Assessment Guidelines of AUR05 Automotive Industry Retail, Service and Repair Training Package. Assessment methods must confirm consistency and accuracy of performance together with application of underpinning knowledge. Assessment must be by direct observation of tasks, with questioning on underpinning knowledge and it must also reinforce the integration of key competencies. Assessment may be applied under project-related conditions and require evidence of process. Assessment must confirm a reasonable inference that competence is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances. It is preferable that assessment reflects a process rather than an event and occurs over a period of time to cover varying quality circumstances. Evidence of performance may be provided by customers, team leaders/members or other persons subject to agreed authentication arrangements. Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role. |
Guidance information for assessment |
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Required skills |
Required skills include: collect, organise and understand information related to work orders, plans and safety procedures for the preparation and use of equipment and material for paint touch-up techniques communicate ideas and information to enable confirmation of work requirements and specifications, coordination of work with worksite supervisor, other workers and customers, and the reporting of work outcomes and problems plan and organise activities, including preparation and layout of worksite and obtaining of equipment and material to avoid backtracking, workflow interruptions or wastage work with others and in a team by recognising dependencies and using cooperative approaches to optimise workflow and productivity use mathematical ideas and techniques to use equipment and mix material required for the work establish safe and effective work processes which anticipate and/or resolve problems and downtime, to systematically develop solutions to avoid or minimise reworking and wastage use workplace technology related to the preparation and use of equipment and material for paint touch-up techniques, including the use of specialised tooling and equipment, measuring equipment and communication devices and the reporting/documenting of results |
Required knowledge |
Required knowledge includes: OHS regulations/requirements, equipment, material and personal safety requirements environmental protection requirements/material disposal and storage material safety data sheets industry code of practice the types, applications and preparation processes for paints paint mixing procedures spraying equipment procedures equipment/material safety requirements hand painting procedures, including rolling application procedures work organisation and planning processes enterprise quality procedures |
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Application systems and equipment | Application systems and equipment are to include: spray gun techniques drying techniques paint mixing paint rolling paint straining paint thinning paint matching buffing and polishing |
Materials | Materials are to include: oil-based paints water-based paints synthetic paints vinyl paints, undercoats lacquers enamels paint thinners and paint reducers |
OHS | OHS requirements are to be in accordance with legislation/regulations/codes of practice and enterprise safety policies and procedures. This may include: protective clothing and equipment use of tooling and equipment workplace environment and safety handling of material use of firefighting equipment enterprise first aid hazard control and hazardous material and substances |
Personal protective equipment | Personal protective equipment is to include that prescribed under legislation/regulation/codes of practice and workplace policies and practices |
Safe operating procedures | Safe operating procedures are to include, but are not limited to: operational risk assessment and treatments associated with toxic substances, electrical safety, machinery movement and operation, manual and mechanical lifting and shifting, working in proximity to others and worksite visitors |
Emergency procedures | Emergency procedures related to this unit are to include, but are not limited to: emergency shutdown and stopping of equipment extinguishing fires enterprise first aid requirements worksite evacuation |
Environmental requirements | Environmental requirements are to include, but are not limited to: waste management, noise, dust and clean-up management |
Quality requirements | Quality requirements are to include, but are not limited to: regulations, including Australian Standards internal company quality policy and standards enterprise operations and procedures |
Statutory/regulatory authorities | Statutory/regulatory authorities may include: federal, state/territory and local authorities administering Acts, regulations and codes of practice |
Tooling and equipment | Tooling and equipment may include: spray guns air pressure regulators air compressors personal protective equipment spray booths heating and lighting systems safety equipment mixing equipment paint stirring equipment paint straining and thinning equipment paint pots machine buffs and polishes |
Materials | Materials may include: paint, thinners and cleaning materials |
Communications | Communications are to include, but are not limited to: verbal and visual instructions and fault reporting and may include worksite specific instructions, written instructions, plans or instructions related to job/task, telephones and pagers |
Information/documents | Sources of information/documents may include: verbal or written and graphical instructions, signage, work schedules/plans/specifications, work bulletins, memos, material safety data sheets (MSDS), diagrams or sketches safe work procedures related to the preparation and use of equipment and material for paint touch-up techniques regulatory/legislative requirements pertaining to automotive painting and finishing engineer's design specifications and instructions organisation work specifications and requirements instructions issued by authorised enterprise or external persons Australian standards |
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice | Yes | No | Comments/feedback |
---|---|---|---|
Work instructions are used to determine job requirements, including method and material type. | |||
Job specifications are read and interpreted. | |||
Occupational health and safety (OHS) requirements, including personal protection needs, are observed throughout the work. | |||
Materials are selected and inspected for quality. | |||
Hand, power tooling and safety equipment are identified and checked for operation. | |||
Procedures are determined to minimise waste material. | |||
Procedures are identified for maximising energy efficiency while completing the job. | |||
Information is accessed and interpreted from manufacturer/ component supplier specifications. | |||
Preparation is carried out according to industry regulations/guidelines, OHS requirements, legislation and enterprise procedures/policies. | |||
Information is accessed and interpreted from manufacturer/ component supplier specifications. | |||
Preparation and application of materials is carried out in accordance with manufacturer/component supplier specifications. | |||
Preparation and application of materials is carried out according to industry regulations/guidelines, OHS requirements, legislation and enterprise procedures/ policies. | |||
Material that can be reused is collected and stored. | |||
Waste and scrap is removed following workplace procedure. | |||
Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures. | |||
Unserviceable equipment is tagged and faults identified in accordance with workplace procedures. | |||
Operator maintenance is completed in accordance with manufacturer/component supplier specifications and worksite procedures. | |||
Tooling is maintained in accordance with workplace procedures. |
Forms
Assessment Cover Sheet
AURV230449A - Apply paint touch-up techniques
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURV230449A - Apply paint touch-up techniques
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent
Assessor name:
Signature:
Date:
Student signature:
Date: