AURVTN011 - Remove and install vehicle rear vision mirrors
Assessor Resource
AURVTN011 Remove and install vehicle rear vision mirrors
Assessment tool
Version 1.0 Issue Date: May 2024
This unit describes the performance outcomes required to remove and install rear vision mirrors attached to vehicle windscreens. It involves preparing for the task, selecting and using tools and equipment, selecting glass adhesives, cleaning glass surface, apply adhesive, positioning and securing rear vision mirror, and completing workplace processes and documentation.
It applies to those working in the automotive service and repair industry.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to remove and install rear vision mirror
1.1 Job requirements are determined from workplace instructions
1.2 Manufacturer removal and installation information and adhesive safety data sheets (SDS) are sourced and interpreted
1.3 Materials for rear vision mirror installation are selected and checked for quality and serviceability
1.4 Hazards associated with the work are identified and risks are managed
1.5 Tools and equipment are sourced and checked for serviceability
1.6 Work is planned to identify methods, minimise waste, and prevent damage to vehicle
2. Remove and install rear vision mirror
2.1 Rear vision mirror is removed according to workplace procedures and safety and environmental requirements , and without causing damage to vehicle or components
2.2 Glass surface is cleaned and prepared
2.3 Adhesive is prepared and applied to surface for rear vision mirror installation
2.4 Mirror is positioned accurately and installed using manufacturer-approved methods, materials and equipment
3. Complete work processes
3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
3.4 Workplace documentation is processed according to workplace procedures
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
remove and install rear vision mirrors to three different vehicles.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to removing and installing vehicle rear vision mirrors, including procedures for:
selecting and using personal protective equipment (PPE)
using tools, equipment and adhesives
using safety data sheets (SDS) for adhesives
cleaning glass surfaces
environmental requirements, including procedures for trapping, storing and disposing of waste materials and adhesives
mirror removal and installation methods and techniques, including:
types and use of equipment and materials
glass and rear vision mirror surface cleaning
types of mirror adhesives and their application
correct placement and location of rear vision mirrors
procedures for protecting vehicle and components when removing and installing mirrors
procedures for final inspection of fitted rear vision mirrors.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the rear vision mirrors they have removed and installed, e.g. work orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive workplace or simulated workplace
workplace instructions
SDS for adhesives
adhesives or adhesive system
cleaning products
three different vehicles requiring the removal and installation of rear vision mirrors
tools, equipment and materials appropriate for removing and installing rear vision mirrors.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to remove and install rear vision mirror
1.1 Job requirements are determined from workplace instructions
1.2 Manufacturer removal and installation information and adhesive safety data sheets (SDS) are sourced and interpreted
1.3 Materials for rear vision mirror installation are selected and checked for quality and serviceability
1.4 Hazards associated with the work are identified and risks are managed
1.5 Tools and equipment are sourced and checked for serviceability
1.6 Work is planned to identify methods, minimise waste, and prevent damage to vehicle
2. Remove and install rear vision mirror
2.1 Rear vision mirror is removed according to workplace procedures and safety and environmental requirements , and without causing damage to vehicle or components
2.2 Glass surface is cleaned and prepared
2.3 Adhesive is prepared and applied to surface for rear vision mirror installation
2.4 Mirror is positioned accurately and installed using manufacturer-approved methods, materials and equipment
3. Complete work processes
3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
3.4 Workplace documentation is processed according to workplace procedures
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Materials must include:
rear vision mirror
adhesives or adhesive system
cleaning products.
Safety and environmental requirements must include:
work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:
selecting and using personal protective equipment (PPE)
using tools, equipment and adhesives
using SDS for adhesives
cleaning glass surfaces
environmental requirements, including procedures for trapping, storing and disposing of waste materials and adhesives.
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
remove and install rear vision mirrors to three different vehicles.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to removing and installing vehicle rear vision mirrors, including procedures for:
selecting and using personal protective equipment (PPE)
using tools, equipment and adhesives
using safety data sheets (SDS) for adhesives
cleaning glass surfaces
environmental requirements, including procedures for trapping, storing and disposing of waste materials and adhesives
mirror removal and installation methods and techniques, including:
types and use of equipment and materials
glass and rear vision mirror surface cleaning
types of mirror adhesives and their application
correct placement and location of rear vision mirrors
procedures for protecting vehicle and components when removing and installing mirrors
procedures for final inspection of fitted rear vision mirrors.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the rear vision mirrors they have removed and installed, e.g. work orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive workplace or simulated workplace
workplace instructions
SDS for adhesives
adhesives or adhesive system
cleaning products
three different vehicles requiring the removal and installation of rear vision mirrors
tools, equipment and materials appropriate for removing and installing rear vision mirrors.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Job requirements are determined from workplace instructions
Manufacturer removal and installation information and adhesive safety data sheets (SDS) are sourced and interpreted
Materials for rear vision mirror installation are selected and checked for quality and serviceability
Hazards associated with the work are identified and risks are managed
Tools and equipment are sourced and checked for serviceability
Work is planned to identify methods, minimise waste, and prevent damage to vehicle
Rear vision mirror is removed according to workplace procedures and safety and environmental requirements , and without causing damage to vehicle or components
Glass surface is cleaned and prepared
Adhesive is prepared and applied to surface for rear vision mirror installation
Mirror is positioned accurately and installed using manufacturer-approved methods, materials and equipment
Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Job requirements are determined from workplace instructions
Manufacturer removal and installation information and adhesive safety data sheets (SDS) are sourced and interpreted
Materials for rear vision mirror installation are selected and checked for quality and serviceability
Hazards associated with the work are identified and risks are managed
Tools and equipment are sourced and checked for serviceability
Work is planned to identify methods, minimise waste, and prevent damage to vehicle
Rear vision mirror is removed according to workplace procedures and safety and environmental requirements , and without causing damage to vehicle or components
Glass surface is cleaned and prepared
Adhesive is prepared and applied to surface for rear vision mirror installation
Mirror is positioned accurately and installed using manufacturer-approved methods, materials and equipment
Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Forms
Assessment Cover Sheet
AURVTN011 - Remove and install vehicle rear vision mirrors
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURVTN011 - Remove and install vehicle rear vision mirrors
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent