This unit describes the performance outcomes required to prepare vehicle body surfaces and apply vinyl film wrapping materials. It involves preparing for the task, selecting and using specialist tools, selecting vinyl film materials, checking vinyl film quality, and completing workplace processes and documentation.
It applies to those working in the automotive paint refinishing repair industry.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to apply vehicle body film wrapping
1.1 Job requirements are determined from workplace instructions
1.2 Workplace procedures and vinyl film supplier recommended application methods are accessed and interpreted
1.3 Vinyl film wrapping materials are selected and inspected for quality
1.4 Hazards associated with the work are identified and risks are managed
1.5 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
1.6 Vehicle panel surface is assessed for quality
1.7 Work is planned to apply body film wrapping, minimise waste, and prevent damage to vehicle
2. Measure, cut and apply vinyl film
2.1 Surface area is measured accurately and patterns are produced
2.2 Vinyl film material is cut according to vinyl pattern specifications and safety and environmental requirements
2.3 Body surface is prepared using vinyl film supplier approved methods, materials and equipment
2.4 Vinyl film wrapping materials are applied according to vinyl film supplier specifications and workplace procedures, and without causing damage to body surface
3. Complete work processes
3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
3.4 Workplace documentation is processed according to workplace procedures
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
apply vinyl film wrapping on three different vehicles.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to applying vehicle body film wrapping, including procedures for:
selecting and using personal protective equipment (PPE)
using specialist tools
environmental requirements, including procedures for trapping, storing and disposing of waste material
types and uses of vinyl film wrapping materials and tools
vinyl film supplier recommended methods and techniques for applying vinyl film wrapping, including:
surface preparation
surface measurements and pattern development
quality requirements relating to vinyl film wrapping
procedures for protecting vehicle and components when applying film wrapping
procedures for final inspection of vehicle vinyl film wrapping.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of task.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the body film wrapping they have applied to vehicles, e.g. work orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive workplace or simulated workplace
workplace instructions
PPE to apply vinyl film wrapping
vinyl film supplier specifications and application methods
three different vehicles requiring the application of vinyl film materials
vinyl film wrapping material
tools, equipment and materials appropriate for applying vehicle body film wrapping.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to apply vehicle body film wrapping
1.1 Job requirements are determined from workplace instructions
1.2 Workplace procedures and vinyl film supplier recommended application methods are accessed and interpreted
1.3 Vinyl film wrapping materials are selected and inspected for quality
1.4 Hazards associated with the work are identified and risks are managed
1.5 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
1.6 Vehicle panel surface is assessed for quality
1.7 Work is planned to apply body film wrapping, minimise waste, and prevent damage to vehicle
2. Measure, cut and apply vinyl film
2.1 Surface area is measured accurately and patterns are produced
2.2 Vinyl film material is cut according to vinyl pattern specifications and safety and environmental requirements
2.3 Body surface is prepared using vinyl film supplier approved methods, materials and equipment
2.4 Vinyl film wrapping materials are applied according to vinyl film supplier specifications and workplace procedures, and without causing damage to body surface
3. Complete work processes
3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
3.4 Workplace documentation is processed according to workplace procedures
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Materials must include:
vinyl film wrapping materials
patterns
application tools
cleaning agents.
Safety and environmental requirements must include:
work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:
selecting and using PPE
using specialist tools
environmental requirements, including procedures for trapping, storing and disposing of waste material.
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
apply vinyl film wrapping on three different vehicles.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to applying vehicle body film wrapping, including procedures for:
selecting and using personal protective equipment (PPE)
using specialist tools
environmental requirements, including procedures for trapping, storing and disposing of waste material
types and uses of vinyl film wrapping materials and tools
vinyl film supplier recommended methods and techniques for applying vinyl film wrapping, including:
surface preparation
surface measurements and pattern development
quality requirements relating to vinyl film wrapping
procedures for protecting vehicle and components when applying film wrapping
procedures for final inspection of vehicle vinyl film wrapping.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of task.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the body film wrapping they have applied to vehicles, e.g. work orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive workplace or simulated workplace
workplace instructions
PPE to apply vinyl film wrapping
vinyl film supplier specifications and application methods
three different vehicles requiring the application of vinyl film materials
vinyl film wrapping material
tools, equipment and materials appropriate for applying vehicle body film wrapping.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Job requirements are determined from workplace instructions
Workplace procedures and vinyl film supplier recommended application methods are accessed and interpreted
Vinyl film wrapping materials are selected and inspected for quality
Hazards associated with the work are identified and risks are managed
Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
Vehicle panel surface is assessed for quality
Work is planned to apply body film wrapping, minimise waste, and prevent damage to vehicle
Surface area is measured accurately and patterns are produced
Vinyl film material is cut according to vinyl pattern specifications and safety and environmental requirements
Body surface is prepared using vinyl film supplier approved methods, materials and equipment
Vinyl film wrapping materials are applied according to vinyl film supplier specifications and workplace procedures, and without causing damage to body surface
Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Job requirements are determined from workplace instructions
Workplace procedures and vinyl film supplier recommended application methods are accessed and interpreted
Vinyl film wrapping materials are selected and inspected for quality
Hazards associated with the work are identified and risks are managed
Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
Vehicle panel surface is assessed for quality
Work is planned to apply body film wrapping, minimise waste, and prevent damage to vehicle
Surface area is measured accurately and patterns are produced
Vinyl film material is cut according to vinyl pattern specifications and safety and environmental requirements
Body surface is prepared using vinyl film supplier approved methods, materials and equipment
Vinyl film wrapping materials are applied according to vinyl film supplier specifications and workplace procedures, and without causing damage to body surface
Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Forms
Assessment Cover Sheet
AURVTP009 - Apply vehicle body film wrapping
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURVTP009 - Apply vehicle body film wrapping
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent