List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements Elements describe the essential outcomes. | Performance Criteria Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Determine prop requirements | 1.1 Confirm prop production requirements in consultation with relevant colleagues and with reference to props documentation 1.2 Decide which casting and moulding techniques are best suited to the types of props required |
2. Prepare for prop construction | 2.1 Select most appropriate mould based on an analysis of how prop items are to be used and the advantages and disadvantages of different options 2.2 Take budget and timelines into account when making decisions about constructing props 2.3 Select tools, equipment and materials appropriate to the casting or moulding technique to be used 2.4 Calculate quantities of required materials, avoiding waste where possible |
3. Construct props | 3.1 Use techniques, tools and materials to create moulds and casts, ensuring that safety procedures are followed at all times 3.2 Check items produced in terms of durability, quality of finish and suitability for production requirements 3.3 Seek feedback on work in progress and adjust techniques as required 3.4 Prepare items in readiness for finishing, according to production requirements 3.5 Contribute to evaluation of prop construction processes and note ways to improve own work performance |
Evidence of the ability to:
use casting and moulding techniques to produce a range of props that meet the requirements of at least two productions
follow safety procedures
meet work deadlines
work collaboratively.
Note: If a specific volume or frequency is not stated, then evidence must be provided for each of the above points at least once.
To complete the unit requirements the individual must:
describe the properties and applications of materials commonly used for casting and moulding
provide reasons for the use of particular materials and techniques for different production requirements
provide examples of different types of moulds
describe issues and challenges that typically arise when using casting and moulding techniques to construct props, and suggest ways to address them
describe safety and environmental issues associated with materials and equipment used in casting and moulding.
Assessment must be conducted in a safe environment where evidence gathered demonstrates consistent performance of typical activities experienced in creative arts industry environments. The assessment environment must include access to:
casting and moulding materials
prop specifications.
Assessors of this unit must satisfy the requirements for assessors in applicable vocational educational and training legislation, frameworks and/or standards.