List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
ELEMENTS | PERFORMANCE CRITERIA |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions. |
1. Prepare for assessing | 1.1 Review work order and where required check with appropriate personnel. 1.2 Identify type and quantity of material to be assessed and obtain from storage location. 1.3 Select appropriate equipment and check for operational effectiveness in line with manufacturer's recommendations. 1.4 Plan visual assessment process in line with organisational procedures. |
2. Assess timber | 2.1 Identify requirements for storage and subsequent processing of materials. 2.2 Assess characteristics and defects of material against industry and Australian Standards to determine plating potential. 2.3 Identify defects prior to plating or sawing. 2.4 Orientate timber components to make best use of characteristics. 2.5 Select timber assessed as unsuitable for plating for reprocessing to minimise wastage. 2.6 Record assessment outcomes and distribution problems and report to appropriate personnel. |
3. Distribute material | 3.1 Reject sub-standard materials; dispose of or recycle in line with environmental protection practices. 3.2 Organise movement of material to storage or processing operations in line with organisational procedures. 3.3 Monitor on-site movement of material to ensure intended flow is achieved. 3.4 Label material in line organisational procedures. |
A person demonstrating competency in this unit must satisfy all of the elements, performance criteria and foundation skills of this unit. If a specific volume or frequency is not stated below, then evidence must be provided that the following requirements have been performed on at least one occasion:
assess the following range of timber for its manufacturing potential for frame and truss construction:
native timber species
imported timber species
dressed timber
in-the-rough timber
stress and non-stress graded timber
preservative treated timber
use the following equipment during assessments:
charts
gauges
picture cards
measuring equipment
complete an assessment report for each timber assessment identifying timber characteristics and defects and how these would impact on nail plate holding ability.
A person competent in this unit must be able to demonstrate knowledge of:
basic aspects of guidelines and standards for provisions relevant to engineered strength ratings and timber ability to hold nail plates
environmental protection practices for safely disposing of, recycling and reusing timber in a forest products factory setting
range of timber characteristics and defects and how these affect nail plate holding ability including:
bow, spring and twist
wane/want and collapse
cupping and other distortion
knots and knot holes
borer damage
gum/resin veins and pockets
decay
end splits, internal checks and surface checks
low density material
compression failures and fractures
durability
heart in material
joint strength
range of industry standard timber species and materials and how these affect nail plate holding ability including:
native timber species
imported timber species
dressed timber
in-the-rough timber
stress and non-stress graded timber
preservative treated timber
laminated veneer coated and treated timber products
beams or laminated beams
range of industry standard lengths, cross sections and grades and how these affect nail plate holding ability
storage requirements for timber as it relates specifically to the organisation’s operation
processing requirements for timber as it relates specifically to the organisation’s product range
methods to orientate components to make best use of timber characteristics
methods to label assessed timber and common terms used
types of tools and equipment used for assessing timber; their purpose, features and use:
charts
gauges
picture cards
measuring equipment
organisational procedures specific to assessing timber:
communication reporting lines
recording and reporting assessment outcomes.
The following resources must be made available:
tools and equipment used for assessing timber:
charts
gauges
picture cards
measuring equipment
a comprehensive commercial range of timber to be assessed with characteristics and defects
personal and protective equipment for assessing timber for manufacturing potential
work order for timber assessment activities
template timber assessment reports
organisational procedures for assessing timber.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessor requirements
Assessors must:
hold the appropriate assessor competency standards as outlined in regulations; and
be able to demonstrate vocational competencies at least to the level being assessed; and
be able to demonstrate how they are continuing to develop their VET knowledge and skills as well as maintaining their industry currency and assessor competence.