Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
ELEMENT | PERFORMANCE CRITERIA |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1.Maintain operation of delivery systems | 1.1 Delivery systems are monitored and adjusted to ensure efficient continuous operation to ensure no damage to finished product 1.2 Substrate is added to and removed from the process according to job specifications |
2. Maintain basic flat-bed cutting process | 2.1 Cutting edge and knife condition are monitored and adjusted to ensure product quality meets the approved sample standard 2.2 Cutting pressures are monitored and adjusted to ensure product quality meets the approved sample standard 2.3 Registration of cutting devices and knife(s) is monitored and adjusted to ensure product quality meets the approved sample standard 2.4 Packing of cutting devices is monitored and adjusted to ensure product quality meets the approved sample standard 2.5 Basic in-line printing/converting/binding/finishing process(es) are monitored and adjusted to ensure product quality meets the approved sample standard |
3. Maintain production process | 3.1 Production process is operated in association with fellow workers and according to enterprise procedures and planned daily schedule 3.2 Production is maintained according to work health and safety (WHS) requirements, manufacturer’s specifications and enterprise procedures 3.3 Manual and/or automatic control is used according to job specifications 3.4 Performance is monitored and verified using the process control system according to enterprise procedures 3.5 Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention 3.6 Process adjustments to eliminate problems are reported according to enterprise procedures 3.7 Faulty performance of equipment is identified and reported according to enterprise procedures 3.8 Waste is sorted according to enterprise procedures |
4. Identify and rectify problems | 4.1 Problems in cutting (flat-bed) machine operation are identified and reported according to enterprise procedures 4.2 Adjustments or corrections are carried out according to specified procedures and are consistent with operator’s skill level 4.3 Cutting (flat-bed) machine operation is checked to ensure correct operation |
5. Conduct shutdown of production process | 5.1 Correct shutdown sequence is followed according to manufacturer’s specifications and enterprise procedures 5.2 Shutdown is conducted in association with fellow workers and in compliance with WHS requirements 5.3 Substrate waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures 5.4 Machine faults requiring repair are identified and reported to designated person according to enterprise procedures 5.5 Repair/adjustment is verified prior to resumption of operations |
6. Clean flat-bed cutting machine at end of run | 6.1 Cutting devices and knife(s) are cleaned or replaced ready for next run 6.2 Cutting devices are sharpened 6.3 Machine bed is cleaned ready for next run 6.4 Cutting units are disengaged and cleaned ready for next run 6.5. In-line printing/converting/binding/finishing units are cleaned ready for next run 6.6 Transportation and delivery systems are disengaged and cleaned ready for next run 6.7 Production records or other documentation are accurately completed, where required by enterprise procedures |
This section specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.
Delivery systems MUST include EITHER: | reel OR sheet. |
Monitoring and adjusting MUST include EITHER: | reel stand and rewind reel to maintain correct tension web control system to ensure correct tension sheeting section OR feeder and delivery systems sheet pick-up and transportation systems to ensure accurate and efficient sheet handling transfer system. |
Evidence of the ability to:
demonstrate all safety devices on the required machine.
correctly produce either a flat-bed die cut or embossed product for TWO jobs with different types and sizes of substrate and design of finished patterns according to manufacturer’s and job specifications, enterprise procedures and unit requirements.
Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.
To complete the unit requirements safely and effectively, the individual must:
identify work health and safety factors for:
setting up and/or operating machine transport systems
setting up and/or operating machine delivery systems
maintaining the cutting process
conducting machine shutdown procedures
identify areas of the machine to monitor to ensure trouble-free operation
list checks required when:
substrate is removed from the machine
cutting devices or knives are cleaned or replaced ready for the next run
packing cutting devices
waste is removed from the machine and surrounding area for disposal or recycling
during the machine shutdown process
determine indicators that demand knife replacement
explain pressure adjustment
identify the procedure for correcting common machine faults
identify areas of the machine that require cleaning at the end of the run
identify production records to be kept or written up
identify machine manuals, safety and other documentation relevant to this task and where they are kept, and the information included in them.
Gather evidence to demonstrate consistent performance in conditions that are safe and replicate the workplace. Noise levels, production flow, interruptions and time variances must be typical of those experienced in the converting, binding and finishing field of work and include access to special purpose tools, equipment and materials required to produce a basic flat-bed die cut or embossed product.
Assessors must satisfy NVR/AQTF assessor requirements.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist