Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
ELEMENT | PERFORMANCE CRITERIA |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Maintain machine delivery system | 1.1 Delivery systems are monitored and adjusted to ensure accurate and continuous operation and eliminate damage to finished product 1.2 Substrate is added to and removed from the process according to job specifications |
2. Maintain complex flat-bed cutting process | 2.1 Knife condition is monitored and adjusted to ensure product quality meets the approved sample standard 2.2 Cutting pressures are monitored and adjusted to ensure product quality meets the approved sample standard 2.3 Registration of knife/knives is monitored and adjusted to ensure product quality meets the approved sample standard 2.4 Packing of cutting devices is monitored and adjusted to ensure product quality meets the approved sample standard 2.5 In-line printing/converting/binding/finishing processes are monitored and adjusted to ensure product quality meets the approved sample standard |
3. Maintain operation of production process | 3.1 Production process is operated in association with fellow workers and according to enterprise procedures and planned daily schedule 3.2 Production is maintained according to work health and safety (WHS) requirements, manufacturer’s specifications and enterprise procedures 3.3 Manual and/or automatic control is used according to job specifications 3.4 Performance is monitored and verified using the process control system according to enterprise procedures 3.5 Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention 3.6 Process adjustments to eliminate problems are reported according to enterprise procedures 3.7 Faulty performance of equipment is identified and reported according to enterprise procedures 3.8 Waste is sorted according to enterprise procedures |
4. Identify and rectify problems | 4.1 Problems in cutting (flat-bed) machine operation are identified and reported according to enterprise procedures 4.2 Adjustments or corrections are carried out according to specified procedures, and are consistent with operator’s skill level 4.3 Cutting (flat-bed) machine operation is checked to ensure correct operation |
5. Conduct shutdown of production process | 5.1 Correct shutdown sequence is followed according to manufacturer’s specifications and enterprise procedures 5.2 Shutdown is conducted in association with fellow workers and in compliance with WHS requirements 5.3 Substrate waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures 5.4 Machine faults requiring repair are identified and reported to designated person according to enterprise procedures 5.5 Repair/adjustment is verified prior to resumption of operations |
6. Clean flat-bed cutting machine at end of run | 6.1 Knife and machine bed are cleaned ready for next run 6.2 Cutting devices are sharpened correctly according to WHS requirements and enterprise procedures 6.3 Cutting machine is disengaged and cleaned ready for next run 6.4 In-line printing/converting/binding/finishing units are cleaned ready for next run 6.5 Transportation and delivery systems are disengaged and cleaned ready for next run 6.6 Production records or other documentation are accurately completed where required by enterprise procedures |
This section specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.
Delivery systems MUST include EITHER: | reel delivery system OR sheet delivery system. |
Monitoring and adjusting MUST include EITHER: | reel stand, web control system, rewind reel and/or sheeting section OR feeder/sheet pick-up and transport system, transfer system and delivery system. |
Evidence of the ability to:
demonstrate all safety devices on either the flat-bed die cutting or embossing machine
produce TWO complex jobs (including in-line processes) using EITHER the flat-bed die cutting OR embossing machine, with different substrates, sizes and patterns according to manufacturer’s and job specifications, enterprise procedures and work health and safety (WHS) requirements
demonstrate use of computerised control, monitoring and data entry systems if available and appropriate.
Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.
To complete the unit requirements safely and effectively, the individual must:
describe WHS factors for setting up and/or operating machine transport systems
outline checks to make when substrate is removed from the machine
For Reel Delivery Systems Only
explain areas of the:
reel stand to monitor to ensure trouble-free operation
web control system to adjust to maintain correct web tension
web control system to adjust to maintain correct positioning of the web
delivery system to observe to maintain quality and prevent damage to the finished product
For Sheet Delivery Systems Only
explain areas of the:
sheet-fed feeder to monitor to ensure trouble-free operation
sheet pick-up system to adjust to ensure accurate and continuous sheet handling
Flat bed cutting operations
describe WHS factors for maintaining the cutting process
explain indicators that demand replacement of a knife
determine checks to make when cutting pressure is adjusted
list ways registration can be guaranteed
explain what production difficulties can be expected during production runs
Machine problems and cutting faults
describe WHS factors for problem-solving on the machine maintaining the cutting process
identify checks to make when:
packing cutting devices
correcting dull cutting edges on equipment
correcting the depth of embossing
correcting out-of-square results
Machine shut down and cleaning
describe WHS factors for conducting machine shutdown procedures
identify what checks to make when:
waste is removed from the machine and surrounding area for disposal or recycling
shutting down and/or disengaging the machine
cutting devices or knives are cleaned or replaced ready for next run
list areas of the machine to clean at the end of the run
Quality assurance
describe production records to keep or write up, and the information to include
explain quality aspects to consider in a completed cutting job
describe steps to ensure important features of the production control system are followed
Information sources
identify machine manuals, safety and other documentation relevant to this task, where they are kept, and the information included in them
explain other available sources of information.
Gather evidence to demonstrate consistent performance in conditions that are safe and replicate the workplace. Noise levels, production flow, interruptions and time variances must be typical of those experienced in the converting, binding and finishing field of work and include access to:
special purpose tools, equipment and materials
industry software packages
flat bed die cut and embossing equipment.
Assessors must satisfy NVR/AQTF assessor requirements.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist