OHS factors that must be considered when operating sheet-fed transportation and delivery systems areas of the sheet-fed feeder that should be monitored to ensure trouble-free operation parts of the sheet pick-up system that are to be adjusted to ensure accurate and continuous sheet feeding areas of the delivery system that should be observed to maintain tension areas of the delivery system that should be observed to prevent damage to the finished product checks to be made when substrate is removed from the machine OHS factors that must be considered when maintaining or adjusting the operation of the machine OHS factors that must be considered when using hot melt adhesive safety clothing that is available for use when operating adhesive binders speed of production sectors to observe to guarantee that the production process is trouble-free and continuous areas of the in-line process that should be monitored to assure the quality of the product circumstances that requirethe machine to be adjusted circumstances that require the machine to be slowed down circumstancesfor machine speed be increased adjustment of the adhesive application on an adhesive binder achieving more spine milling on an adhesive binder adjustment of the wire length on a wire stitcher how straightening the wire in the wire feed on a wire stitcher increasing / decreasing the dwell time on a high frequency welder increasing / decreasing the current on a high frequency welder OHS factors that must be considered when cleaning hot melt from the machine checks to be made when shutting down a given machine FOUR important reasons for a thorough shutdown of operations areas of the machine that needs regular cleaning materials that need to be cleaned from the machine recommended cleaning agents keeping the machine clear of surface rust (condensation) production records that need to be kept or written up information that should be included in this reporting procedure quality aspects that should be considered in a completed adhesive bound job quality aspects that should be considered in a completed high frequency welded job quality aspects that should be considered in a completed wire stitched job steps that should be taken to ensure that important features of the production control system are followed alterations needed to production to meet client requirements items that must be checked against the client's sample machine manuals, safety and other documentation that are relevant to this task and where they are kept and information that is included in these documents
|