reel or sheet transportation and delivery OHS concerns when loading and handling heavy reels sheets are fanned before loading into the press double sheet detector be set and checked during the print run effect on the print of excessive tension on the rewinding reel implications if web is not spliced correctly components that can be adjusted to ensure correct delivery effect excessive suction on the slow-down wheels has lithographic printing operations non-image area of the print was scumming when printing causes of emulsification while printing on a lithographic printing press signs of wear in the image area of the plate level the ink level should be maintained at in-line processes OHS concerns for the in-line components of the press frequency the in-line components of the job should be examined quality control and problem solving precautions that should be taken to ensure that the rewound product is of consistent acceptable quality identification of material that is not of an acceptable standard frequency at which the quality of the product be assessed product that is deemed unacceptable by the operator is marked finding information concerning the correct operation of the machine shutdown and wash-up of the press dangers that exist from solvents and solutions used to clean the inking system, plates, cylinders and the press effect could excessive gum has on the plate image parts of the machine need to be thoroughly cleaned following the print run components that are to be inspected for wear following the print run records that are important for following or repeat prints machine manuals, safety and other documentation that are relevant to this task and where are they kept and information that is included in these documents
|