job specifications procedures if vital information were missing from the job ticket checks that should be undertaken prior to set up (availability of materials etc.) web or sheet or product transportation (as relevant) major OHS concerns when setting up transportation systems printing side of the material purpose of nip rollers how the sheet position is determined for the job why the same side lay is used in both print and foil stamping selection of appropriate front lays how high the side and front lays are to be set register check be carried out appropriate product jigs correct table height foils and substrates characteristics that must be considered when selecting foil for foil stamped product type of foil that would be required for foiling on plastic films products and the appropriate foils machine set up OHS concerns related to the set up effect of a soft packing on the foil stamped product methods that can be used to create harder packing effect a higher dwell time has on the foil stamped product what temperature would be the starting point when setting up implications if the temperature was set too high height that the die should be mounted required pressure proofing and adjusting precautions that should be taken to protect from burns not using the first sheet or object printed as a proof during set up cause of an uneven print (top to bottom) length of time for temperature adjustments to become effective signs of a temperature setting that is too high how much the foil should draw through the press on each pass machine manuals, safety and other documentation that are relevant to this task and where are they kept and information included in these documents
|