- ICTCBL2065A - Splice and terminate optical fibre cable for carriers and service providers
Assessor Resource
ICTCBL2065A
Splice and terminate optical fibre cable for carriers and service providers
Assessment tool
Version 1.0
Issue Date: May 2024
Technical staff who splice and terminate optical fibre cable for telecommunications projects apply the skills and knowledge in this unit.
They may carry out new installations, upgrade an optical backbone or access network provisioning for greater bandwidth and capacity required by emerging technology convergence for Next Generation Networks (NGN).
This unit may be applied to commercial or industrial fibre to the premises (FTTP) installations.
This unit describes the performance outcomes, skills and knowledge required to splice and terminate optical fibre cable within an optical telecommunications transmission environment.
This work is essential in provisioning of National Broadband Network (NBN) infrastructure for high speed and high bandwidth transmissions.
Assessment by a TITAB registered assessor is recommended.
All customer cabling work in the telecommunications, fire, security and data industries must be performed by a registered cabler. All cablers are required to register with an Australian Communications and Media Authority (ACMA)-accredited registrar.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Employability Skills
This unit contains employability skills.
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Evidence of the ability to: splice, terminate and test optical fibre cable applying safety precautions when working with laser -based systems splice at least 12 fibres and house these in splicing cassettes and trays within industry recognised enclosures according to manufacturer's instructions install a connector type for fusion, mechanical splicing and direct terminations complete relevant documentation to manufacturer's and design requirements provide report documenting the installation and test results to client comply with all related OHS requirements and work practices. |
Context of and specific resources for assessment | Assessment must ensure: sites where splicing and termination of optical fibre cable may be conducted use of optical fibre testing equipment currently used in industry relevant regulatory and equipment documentation that impact on optical fibre cable installation activities. |
Method of assessment | A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit: review of a hands-on project completed by the candidate review of an oral and written report, including installation and test results direct observation of the candidate carrying out splicing of optical fibre within an optical communication system. |
Guidance information for assessment | Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example: ICTCBL3010A Install and terminate optical fibre cable on customer premises. Aboriginal people and other people from a non-English speaking background may have second language issues. Access must be provided to appropriate learning and assessment support when required. Assessment processes and techniques must be culturally appropriate, and appropriate to the oral communication skill level, and language and literacy capacity of the candidate and the work being performed. In all cases where practical assessment is used it will be combined with targeted questioning to assess required knowledge. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. Where applicable, physical resources should include equipment modified for people with special needs. |
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Required skills |
communication skills to: liaise with internal and external personnel on technical and operational matters relate to work associates, supervisors, team members and clients literacy skills to interpret technical documentation such as equipment manuals, specifications and requirements for optical fibre cable installation numeracy skills to take and analyse measurements planning and organisational skills to organise and maintain equipment problem solving skills to solve equipment and logistics problems safety awareness skills to: apply precautions and required action to minimise, control or eliminate hazards that may exist during work activities apply work site OHS select and use required personal protective equipment conforming to industry and OHS standards work safely with optical fibre and lasers work systematically with required attention to detail without injury to self or others, or damage to goods or equipment technical skills to: install customer access network (CAN) cable operate test equipment to perform measurements on optical fibre perform fault clearance use diagnostic equipment use optical fibre jointing techniques use specialised tools and test equipment use hand and power tools |
Required knowledge |
causes of signal strength loss in optical fibre colour coding of fibres detailed knowledge of AS/NZS 2211:2006 Safety of laser products (parts 1 and 2) features and operating requirements of test equipment for optical fibre cable industry and organisational policy and procedures when splicing optical fibre cable information required to operate equipment according to a test specification manufacturer's requirements for safe operation of optical fibre equipment safety precautions when working with laser based systems specific OHS requirements relating to the activity and site conditions techniques for types of termination including: direct termination fusion splicing mechanical splicing test methods and performance requirements types of optical cable and termination workplace and industry environment |
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
OHS practices may relate to: | determining that optical fibre cable is not live according to guidelines and standards handling optical fibre cable in a safe manner to avoid risk of injury labelling of fibre cable and laser devices locating and identifying adjoining services according to enterprise guidelines and OHS practices observing AS/NZS 2211:2006 Safety of laser products (parts 1 and 2) testing for presence of dangerous gases according to enterprise guidelines. |
Physical conditions may relate to: | above ground in cabinet in joint enclosure. |
Relevant legislation, codes, regulations and standards may include: | Australian Communications Industry Forum (ACIF) standards and codes AS Communications Cabling Manual (CCM) Volume 1 AS/NZS 2211:2006 Safety of laser products (parts 1 and 2) AS/NZS 3000:2007 AS/NZS 3080:2003 AS/NZS 3084:2003 AS/NZS 3085.1:2004 AS/NZS ISO/IEC 14763.3:2007 AS/NZS ISO/IEC 15018:2005 AS/NZS ISO/IEC 24702:2007 cabling security codes and regulations OHS regulated or industry codes of practice including ACMA technical standards technical standards AS/ACIF S008:2006 and AS/ACIF S009:2006. |
Hazards may include: | earth potential rise (EPR) optical cable: bare fibres hazardous laser light remote power feeding. |
Relevant authorities may include: | cable location services (Dial Before you Dig) environment protection local government private owners utility providers such as: electricity fire services gas other telecommunications providers water. |
Dangerous gases may include: | asphyxiating gas carbon dioxide carbon monoxide combustible natural gas noxious gas. |
Guards may include: | barricades plates temporary fencing. |
OHS and environmental requirements may relate to: | identifying other services, including power and gas need to decommission and isolate worksite and lines prior to commencement personal protective clothing: earmuffs gloves: leather plastic rubber head protection kneepads masks protective suits safety boots safety glasses safe working practices, such as the safe use and handling of: asbestos chemicals materials tools and equipment work platforms safety equipment: flashing lights gas and other hazard detection equipment safety barriers trench guards warning signs and tapes witches hats suitable light and ventilation special access requirements environmental considerations: clean-up protection stormwater protection waste management. |
Cable may include: | air blown armoured external internal loose tube tight buffered. |
Appropriate equipment may include: | hand-held optical power meter OFI-fibre to the x (FTTx) active optical network terminal (ONT) detector passive optical network (PON) meter optical time domain reflectometer (OTDR). |
Optical fibres may include: | multi-mode polymer single mode. |
Splice fibres may relate to: | fusion splice mechanical splice preparing connection ends to a smooth flat surface to ensure no optical path redirection from joint removing all coatings from exposed optical fibre and removing all possible contaminants. |
Type of termination may include: | direct termination fusion splicing mechanical splicing. |
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice | Yes | No | Comments/feedback |
---|---|---|---|
Select safety equipment to protect self and public according to enterprise guidelines and occupational health and safety (OHS) practices | |||
Confirm layout of job using installation according to physical conditions at site and relevant legislation, codes, regulations and standards | |||
Inform appropriate personnel of identified hazards on worksite | |||
Locate other services from relevant authorities according to enterprise guidelines and safe practices | |||
Test for dangerous gases and place guards around open manholes following OHS and environmental requirements | |||
Obtain approval for alterations to the design according to enterprise guidelines | |||
Verify that cable was installed according to the installation plan and visually inspect cable for signs of sheath damage | |||
Maintain minimum bend ratios according to manufacturer's specifications to prevent cable damage and signal degradation | |||
Secure cable according to safe industry practice to avoid cable and sheath damage | |||
Verify fibre is not live using appropriate equipment to maintain safe working practice and ensure correct fibre has been identified | |||
Prepare cable end to expose optical fibres according to splicing method and manufacturer's specifications | |||
Prepare and splice fibres using safe industry practice according to enterprise specifications | |||
Test the splice joint to manufacturer's and design requirements | |||
Select connector unit to suit terminating frame according to design specifications | |||
Terminate the cable using the type of termination specified in the plan and according to manufacturer's specifications | |||
Test the termination for transmission loss and strength and re-terminate if the transmission loss exceeds the manufacturer's specifications | |||
Install protection devices on connectors and fibres to protect from exposure and contaminants | |||
Label and lay up cables in enclosure according to manufacturer's instructions and enterprise guidelines | |||
Remove waste and reinstate site according to enterprise guidelines | |||
Prepare reports including test results and alterations to plans according to enterprise policy | |||
Notify client of work completion and obtain sign off |
Forms
Assessment Cover Sheet
ICTCBL2065A - Splice and terminate optical fibre cable for carriers and service providers
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
ICTCBL2065A - Splice and terminate optical fibre cable for carriers and service providers
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent
Assessor name:
Signature:
Date:
Student signature:
Date: