List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
ELEMENT | PERFORMANCE CRITERIA |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Specify the operation of a data network | 1.1 Identify the various network elements 1.2 Use the open system interconnections (OSI) and transmission control protocol, or internet protocol (TCP/IP), models to explain how data flows in a network 1.3 Define the purpose, and basic operation, of the protocols in the OSI and TCP/IP models 1.4 Identify common network problems at layers 1, 2, 3 and 7, using a layered model approach |
2. Implement a small switched network | 2.1 Select the appropriate media, cables, ports, and connectors to connect switches to other network devices and hosts 2.2 Identify the network segmentation, basic traffic management and switching requirements 2.3 Perform, save and verify the initial switch configuration tasks 2.4 Verify the network status and switch the operation using basic utilities 2.5 Implement and verify the basic security for a switch |
3. Implement an IP addressing scheme and IP services to meet network requirements | 3.1 Specify the need and role of addressing in a network 3.2 Create and apply an addressing scheme to a network 3.3 Assign and verify valid IP addresses to hosts, servers and networking devices in a local area network (LAN) environment 3.4 Specify the operational requirements of private and public IP addressing 3.5 Implement static and dynamic addressing services for hosts in a LAN environment 3.6 Enable the network address translation (NAT) for a small network, with a single internet service provider (ISP) and connection, and verify the operation 3.7 Configure the dynamic host configuration protocol (DHCP) on a router |
4. Implement a small routed network | 4.1 Select the appropriate media, cables, ports, and connectors to connect routers to other network devices and hosts 4.2 Research and select a basic router 4.3 Perform, save and verify basic router configuration tasks 4.4 Configure and verify, a classless routing protocol 4.5 Verify the device configuration and network connectivity, using basic utilities 4.6 Implement the password, and physical security |
5. Implement and verify WAN links | 5.1 Research different methods for connecting to a WAN 5.2 Configure and verify, the basic WAN serial connection |
6. Troubleshoot a small enterprise branch network | 6.1 Identify and resolve, common switched network issues 6.2 Identify and correct, IP addressing issues 6.3 Troubleshoot DHCP and NAT on a router 6.4 Identify and resolve, common routing problems 6.5 Troubleshoot basic WAN connection problems |
Evidence of the ability to:
specify the network elements
implement a small switched network
select and implement the suitable network addressing protocols
select and install a router
identify and verify, wide area network (WAN) links
test and resolve the problems for a small enterprise branch network.
Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.
To complete the unit requirements safely and effectively, the individual must:
summarise the design of an internet protocol (IP) addressing scheme
describe how to install, configure and test the network elements, in order to ensure interoperability within the network
explain how to apply network topologies, protocols and security solutions and troubleshoot defined network problems.
Gather evidence to demonstrate consistent performance in conditions that are safe and replicate the workplace. Noise levels, production flow, interruptions and time variances must be typical of those experienced in the network industry, and include access to:
a site where the network installation may be conducted
small enterprise routers and switches
the network’s design documentation
the equipment specifications
hardware and software
the organisational guidelines
computers.
Assessors must satisfy NVR/AQTF assessor requirements.