List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
ELEMENT | PERFORMANCE CRITERIA |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Prepare for installation infrastructure work | 1.1 Obtain relevant legislation, codes, regulations and standards for compliance when conducting work 1.2 Notify customer to arrange site access and obtain installation plan and specifications 1.3 Conduct a site survey to verify infrastructure installation requirements can be met 1.4 Identify site hazards and notify appropriate personnel to make site safe 1.5 Notify customer of alterations required to installation design and make recommendations for possible solutions 1.6 Obtain approval for alterations, and update installation plan 1.7 Develop installation activity schedule to minimise disruption to the workplace and according to relevant regulations and standards 1.8 Obtain material supplies, safety equipment, resources, tools and test equipment to be available when required for installation for safe work practice |
2. Build customer equipment infrastructure | 2.1 Prepare for given work according to work health and safety (WHS) and environmental requirements 2.2 Build telecommunications closet or telecommunications equipment room to house equipment, distributors and AC-DC power systems according to design plans, manufacturer’s specifications and to safety and electrical standards 2.3 Build cable support systems for signal, data cabling and optical cables, including entrance facilities, intra, and inter building facilities according to plan and specification 2.4 Organise installation of mains AC electrical power cabling infrastructure as specified on the plan 2.5 Install cable distribution frames according to plan and manufacturer’s specifications 2.6 Install protective earthing to metal infrastructures or gas arrestors according to specifications or design |
3. Install uninterrupted power supply (UPS) power infrastructure | 3.1 Install batteries, rectifiers and uninterrupted power supply (UPS) systems as required by specifications or design and connect according to manufacturer’s and work health and safety (WHS) requirements 3.2 Test and monitor UPS battery discharge levels and obtain replacement batteries under warranty where required 3.3 Identify and rectify faults where possible or escalate according to enterprise policy |
4. Restore site and complete documentation | 4.1 Attach infrastructure labels and designations according to enterprise requirements 4.2 Complete inspection sheets and declare asset ready for customer sign-off documentation 4.3 Clean up site 4.4 Notify customer and obtain sign-off |
Evidence of ability to:
identify potential earthing locations, cable routes, cables support systems, data cabinets, telecommunication enclosures and distributors
construct metal superstructure and racks
install protective earth installations
organise AC mains power infrastructure
install uninterrupted power supply (UPS) back up power
notify customer of works progress.
Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.
To complete the unit requirements safely and effectively, the individual must:
describe cabling types, connectors and cabling structures used in telecommunications networks
identify and describe common customer telecommunications applications and related equipment
identify connections to carrier infrastructure or equipment
identify and summarise current legislation relating to installation of telecommunications equipment and connection to carrier services
list tools and test equipment required for an infrastructure installation
describe the process of a site survey, and the data that should be recorded
describe environmental impacts, including options for information and communications technology (ICT) installations
discuss network topologies, interface and interconnect solutions
identify work health and safety (WHS) requirements for managing hazards on the worksite including:
confined spaces
electrical safety
working at heights
lifting
materials handling
physical hazards
summarise network and transmission customer equipment likely to be encountered
describe common backup UPS systems and AC mains power requirements and electrical safety for telecommunications networks
discuss types of warranty information for equipment supplies and contractor work guarantees
describe the importance of correctly labelling an installation.
Gather evidence to demonstrate consistent performance in conditions that are safe and replicate the workplace. Noise levels, production flow, interruptions and time variances should be typical of those experienced in the telecommunications networks engineering field of work and include access to:
a site where installation of supporting infrastructure may be conducted, or a simulated environment
plant, tools and equipment currently used in industry
relevant regulatory and equipment documentation that impact work activities.
Assessors of this unit must satisfy the requirements for assessors in applicable vocational education and training legislation, frameworks and/or standards.