List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
ELEMENT | PERFORMANCE CRITERIA |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Ensure conformity of international design to Australian standards | 1.1 Assess original international design to verify compliance with relevant Australian legislation, codes, regulations and standards 1.2 Reconfigure international design in consultation with customer 1.3 Rewrite design specifications to include configuration amendments |
2. Plan and establish test regime | 2.1 Plan type and number of tests to ensure full trial of new or enhanced design and greatest coverage for minimal tests 2.2 Plan and establish test environment to ensure total validity of chosen tests 2.3 Design test regime of proposed system to test impact on existing systems 2.4 Confirm test regime in consultation with planners and verify test equipment meets required standards |
3. Undertake tests | 3.1 Conduct and document tests including live system tests in logical and sequential order to planned test regime 3.2 Negotiate problems experienced during tests with system experts or designers to plan contingency activity according to enterprise policy 3.3 Prepare and submit trouble reports according to enterprise policy |
4. Analyse test results | 4.1 Analyse test results against design specifications and planned outcomes 4.2 Prepare a report referring major deficiencies to designers with recommendations for design change 4.3 Analyse minor variances, plan solutions and document changes to specifications |
5. Retest design changes | 5.1 Implement design and specification changes and conduct further tests as required 5.2 Analyse test results to verify compliance with updated design specifications 5.3 Document results of tests according to enterprise policy |
Evidence of ability to:
apply Australian standards to international designs
identify customer's specific requirements
configure and set up test regimes
identify and conduct tests, including live system tests, and interpret and analyse results
approach problem diagnosis systematically, eliminating causes
re-test design changes
prepare report, including deficiencies, analysis and recommendations.
Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.
To complete the unit requirements safely and effectively, the individual must:
explain the Australian standards applicable to system and equipment compliance
outline necessary connections to carrier infrastructure or equipment
evaluate the system design requiring testing
explain network and equipment tests required for compliance
outline common network architectures
explain relevant international standards.
Gather evidence to demonstrate consistent performance in conditions that are safe and replicate the workplace. Noise levels, production flow, interruptions and time variances should be typical of those experienced in the telecommunications networks engineering field of work and include access to:
a test site where qualification testing of equipment and systems may be conducted
equipment currently used in industry
relevant Australian and international standards, codes, design specifications, manuals and reference materials.
Assessors of this unit must satisfy the requirements for assessors in applicable vocational education and training legislation, frameworks and/or standards.