List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Prepare for operation | 1.1 | Risks to self, others and the environment are identified according to organisational procedures |
1.2 | Routine pre-operational checks of auxiliary machinery systems are completed prior to use according to manufacturer specifications and organisational procedures |
2 | Operate auxiliary machinery systems | 2.1 | Suitable personal protective equipment is selected and used according to organisational procedures |
2.2 | Auxiliary machinery systems are operated in a safe and controlled manner |
2.3 | Performance of auxiliary machinery system operations are monitored |
2.4 | Adverse sea and weather conditions that may impact on operation of auxiliary machinery systems are identified and operational practices are adjusted to maintain safety of vessel and personnel |
2.5 | Faults or malfunctions are identified and recorded according to organisational procedures |
2.6 | Faults or malfunctions are rectified and corrective actions are taken and recorded according to organisational procedures |
2.7 | Procedures to be undertaken in emergencies are recognised and implemented |
3 | Complete operations and check auxiliary machinery systems | 3.1 | Shut-down procedures are conducted according to manufacturer instructions and organisational procedures |
3.2 | Operational records are completed as required according to organisational procedures and regulatory requirements |
Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include:
maintaining records of the operation and maintenance of auxiliary machinery systems and any related safety incidents
monitoring and evaluating performance of auxiliary machinery systems
operating all equipment
reading and interpreting:
manufacturer instructions for the operation of auxiliary machinery systems
maritime regulations, rules and instructions
recognising when the performance of auxiliary machinery systems is unsatisfactory or outside specified limits and taking appropriate action
recognising problems that may occur with auxiliary machinery systems and taking appropriate preventative and remedial action.
Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:
alarm panels
auxiliary systems, materials and construction
awareness of one’s surroundings and changes to these surroundings
causes of deck machinery faults
characteristics of auxiliary machinery systems
closing devices and remote shut offs
dangers associated with operating shipboard auxiliary machinery systems and related hazard prevention strategies
drive systems, belts, clutches and motors
electro-hydraulic steering gear
emergency operation in electrical or hydraulic failure
emergency shut offs and closures
fire detection and fire alarm systems
fixed firefighting installations including CO2, foam and water mist
function of:
grease
lubricating oil
hydraulic systems including steering gear
identification of:
refrigeration system components
faults in refrigeration systems
instrumentation used
methods for controlling and managing operation of shipboard auxiliary machinery systems
operation of deck machinery
own ability and limits to rectify irregularities or faults
problems associated with auxiliary machinery systems, and appropriate preventative and remedial action and solutions
procedures for monitoring and evaluating performance of auxiliary machinery systems
pumps and pumping systems for bilge, fire, fuel oil, freshwater and seawater systems
refrigeration:
cycle
plant and its operation
relevant work health and safety (WHS)/occupational health and safety (OHS) legislation and policies
relevant sections of commonwealth, state and territory maritime regulations, National Standard for Commercial Vessels (NSCV)
requirements for waste management and pollution control from auxiliary machinery systems under the International Convention for the Prevention of Pollution from Ships (MARPOL)
rudder and stock support bearings, glands, packing and seals
rudder construction and rudder types
safe:
operation practices
working procedures
safeguards and protective devices for deck machinery
simple hydraulic circuits
strainers, mud-boxes and foot valves
terminology of materials technology
types of:
fixed firefighting systems including gas and foam flooding systems
pumps and associated safety devices
refrigerant
winches and windlass.
Assessors must satisfy National Vocational Education and Training Regulator (NVR)/Australian Quality Training Framework (AQTF) assessor requirements.
Assessment must occur in workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in simulated workplace operational situations that reflect workplace conditions.
Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.
Resources for assessment must include access to:
tools, equipment, machinery, materials and personal protective equipment currently used in industry
applicable documentation such as legislation, regulations, codes of practice, workplace procedures and operational manuals
range of relevant exercises, case studies and/or simulations.