- MEA109B - Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance
Assessor Resource
MEA109B
Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance
Assessment tool
Version 1.0
Issue Date: June 2024
This unit requires application of basic hand skills and standard trade practices in the maintenance of aircraft and aircraft components.
Applications include the use of hand and power tools, and the selection and use of aircraft hardware.
This unit of competency is applicable to all Aeroskills Maintenance training pathways. It covers the competencies required to perform basic hand skills, apply standard trade practices and fundamentals relevant to the maintenance of aircraft and aircraft components. Where a CASA licensing outcome is sought this unit forms part of the CASA requirement for the granting of the chosen Aircraft Maintenance Engineer Licence under CASR Part 66, in accordance with the licensing provisions in the Assessment Guidelines.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Prerequisites
MEA105C
Apply quality standards applicable to aviation maintenance processes
MEA108B
Complete aviation maintenance industry documentation
Co-Requisites
Not applicable
Employability Skills
This unit contains employability skills.
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | A person who demonstrates competency in this unit must be able to use aviation maintenance hand and power tools to lay out and fabricate simple items, correctly assemble items and apply safety locking devices. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | This unit must be linked in its assessment and application to those units that apply to actual maintenance of aircraft. It is essential that all OHS requirements are met and understood. Evidence of knowledge about how tools and equipment are selected, used and maintained is essential. The ability to manipulate tools and equipment correctly in the performance of tasks is necessary to demonstrate transferability of hand skills across a variety of applications. A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements of the unit of competency are being achieved under routine supervision on the tasks listed in Groups 1 to 4 in the Range Statement. This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry. |
Context of and specific resources for assessment | Competency should be assessed in the work environment, or by use of simulated activities, using tools and equipment specified by aircraft manuals as well as general purpose tools and test equipment found in most routine situations. It is expected that the person operating these tools and equipment would be able to demonstrate a broad application of their skills. |
Method of assessment | |
Guidance information for assessment |
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Required skills |
Look for evidence that confirms skills in: the correct identification, inspection of, application, use and storage of general and purpose specific hand tools (i.e. spanners, screwdrivers, pliers, hammers, cutting devices, files, punches, drills and marking out tools) that may be found in an aircraft engineering workshop or hangar the correct identification, inspection of (including calibration), application, use and storage of precision measuring tools (i.e. micrometers, vernier instruments, feeler gauges, go/no-go gauges) that may be found in an aircraft engineering workshop or hangar. Reading instrument scales must be clearly demonstrated during application of instruments to ensure compliance with specifications the correct identification, inspection of, application, operation and storage/servicing of portable and fixed power and machine tools (i.e. drills, presses, grinders, shears, pan breaks) that may be found in an aircraft engineering workshop or hangar identification, inspection and use of lubrication equipment determination of correct lubricants for specified applications identification of common ferrous and non-ferrous aircraft materials identification of common aircraft composite and non-metallic materials (other than wood) identification of aircraft hardware by markings, part numbers, size, shape and material the installation of aircraft hardware using standard practices/techniques to ensure safe security and includes: minimum thread engagement split pinning lockwiring application of locking compounds locking tabs, spring washers lock nuts the installation of aircraft hardware using tightening, torquing and tensioning techniques. Calculating setting, reading scales and setting up of torque wrench and/or tensioning devices must be clearly demonstrated before application of wrench or device identification of various types of aircraft rigid and flexible plumbing and their connectors identification of aircraft control cables and related cable system hardware |
Required knowledge |
Look for evidence that confirms knowledge of: types of standard aircraft hardware and methods of identification, including bolts, nuts, washers, pins (cotter, tapered), and fasteners (rivets and camlocs) materials from which hardware is manufactured and its applications, including plain, corrosion resistant and temperature/heat resistant types of safety locking devices and their application common ferrous and non-ferrous aircraft materials, heat treatment and testing characteristics and properties of common composite and non-metallic materials other than wood types of aircraft cable, turnbuckles, end fittings, tensiometers, pulleys and cable system components, aircraft flexible control systems types and characteristics of lubricants types and uses of lubrication equipment fits and clearances hand and power tool storage and maintenance requirements tool calibration requirements OHS requirements relation to the use of hand and power tools |
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Note | Range statements listed below are numbered to facilitate specification of the assessment requirements included in the Evidence Guide |
Application of competency | The competency applies to the selection and use of hand and power tools and equipment associated with on-aircraft or workshop related activities in the aircraft maintenance environment that involve: 1. Laying out and fabricating simple items from common aircraft materials 2. Assembling items using a representative range of common types of aircraft attachment hardware for which relevant fits and clearances, appropriate safety locking devices and fasteners, including lockwire, are correctly selected and applied 3. Assembling/connecting a range of common aircraft connectors and plumbing, applying safety locking devices, where applicable 4. Assembling/connecting aircraft control cables and applying safety locking devices, where applicable |
The use of tools and equipment | The use of tools and equipment includes the related manipulative skills required to perform maintenance |
Application of this unit may relate to: scheduled or unscheduled maintenance activities individual or team-related activities | |
Procedures and requirements | Refer to industry standard procedures specified by manufacturers, regulatory authorities or the enterprise |
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice | Yes | No | Comments/feedback |
---|---|---|---|
Available information from relevant documentation and/or other sources, including communication with other personnel, is interpreted and assessed to determine the task and tooling requirements | |||
Hand and/or power tools or equipment are selected for appropriate application to the required task | |||
All tools and/or equipment to be used are checked for condition or calibration, where necessary | |||
Unsafe or faulty tools or equipment are identified and marked for repair according to enterprise procedures | |||
Tools and/or equipment are used according to standard practices to ensure the correct outcome is produced | |||
Tools and/or equipment use is carried out without damage to components or tooling in a safe and efficient manner | |||
Operational maintenance of tools or equipment is undertaken according to standard workshop procedures | |||
Tools and/or equipment are stored safely and securely in accordance with enterprise procedures | |||
Simple items are manufactured using basic engineering hand skills | |||
Common types of aircraft attachment hardware are correctly selected and used | |||
Common types of safety locking devices and fasteners are correctly selected and used | |||
Aircraft components, devices and hardware are lockwired in the correct manner, using the appropriate wire gauge | |||
Common types of aircraft connectors and plumbing are accurately assembled or connected |
Forms
Assessment Cover Sheet
MEA109B - Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
MEA109B - Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent
Assessor name:
Signature:
Date:
Student signature:
Date: