List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. | Remove pneumatic system components | 1.1 | Pneumatic system is rendered safe and prepared in accordance with the applicable maintenance manual and isolation tags are fitted, where necessary, to ensure personnel safety |
| | 1.2 | Removal of components is carried out in accordance with the applicable maintenance manual while observing all relevant work health and safety (WHS) requirements, including the use of material safety data sheets (MSDS) and items of personal protective equipment (PPE) |
| | 1.3 | Required maintenance documentation is completed and processed in accordance with standard enterprise procedures |
| | 1.4 | Removed components are tagged, sealed and packaged in accordance with specified procedures |
2. | Install pneumatic system components | 2.1 | Components to be installed are checked to confirm correct part numbers, serviceability and modification status |
| | 2.2 | Installation is carried out to pneumatic system in accordance with the applicable maintenance manual while observing all relevant WHS requirements, including the use of MSDS and items of PPE |
| | 2.3 | Required maintenance documentation is completed and processed in accordance with standard enterprise procedures |
Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria under the specified conditions of assessment, and must include:
applying relevant WHS practices, including the use of MSDS and PPE
using relevant maintenance documentation and aircraft manuals to:
locate and correctly remove and install components in pneumatic systems, including fire-extinguishing systems
locate and correctly remove and install components in air cycle air conditioning systems
locate and correctly remove and install components in pressurisation systems
correctly remove and install rigid and flexible pipelines
correctly remove and install ducting
observing regulations governing the handling and custody of fire-extinguishers containing ODS or SGG extinguishing agents (e.g. BCF).
It is essential that system cleanliness requirements and safety precautions applicable to the system being maintained are fully observed, understood and complied with.
Evidence of transferability of skills and knowledge related to removal and installation is essential. This may be demonstrated through application across a number of aircraft systems or aircraft types, but must cover a sufficient range of tasks to demonstrate familiarity with attachment methods, connection hardware and couplings peculiar to each type of system, and of safe handling of heavy components.
Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:
component attachment methods
connection hardware and couplings
standard trade practices relating to tool usage and installation/securing of aircraft hardware
how to locate and correctly remove and install components of:
pneumatic systems
air cycle air conditioning system components
pressurisation system components
fire-extinguishers, including the effect of ODS or SGG extinguishing agents and regulations covering special precautions and handling requirements for BCF fire-extinguishers
electrical circuit isolation and plug removal and installation
WHS procedures relating to pneumatic, air conditioning and pressurisation systems
how to obtain MSDS
the selection and use of items of PPE
relevant maintenance manuals
relevant regulatory requirements and standard procedures, including those relating to the handling and control of halon fire-extinguishers.
Competency should be assessed in the work environment or simulated work environment using tools and equipment specified in maintenance manuals. It is also expected that general-purpose tools, test and ground support equipment found in most routine situations would be used where appropriate.
An understanding of system operation as it relates to the work must be demonstrated before undertaking any action. The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards.
The following conditions of assessment represent the requirements of the Regulators (ADF and CASA) and maintenance stakeholders and must be rigorously observed.
A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements and performance criteria of the unit of competency are being achieved under routine supervision on one (1) item from each from the following groups:
filters, valves, pumps, motors, actuators and regulators
gauges (direct reading), temperature sensors, pressurisation controllers and temperature controllers
heat exchangers, pressure vessels, condensers, compressors, expansion turbines and humidifiers
rigid and flexible pipelines, hoses and fittings
ducting
fire-extinguishers, including those containing ODS or SGG extinguishing agents (e.g. BCF) (may be omitted where not applicable to enterprise).
This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry Evidence Guide (for details refer to the Companion Volume Assessment Guidelines).
Assessors must satisfy the requirements of the National Vocational Education and Training Regulator (Australian Skills Quality Authority, or its successors).
Where the unit is to be used for CASA licensing purposes the Assessor must also meet the criteria specified in the CASR Part 147 Manual of Standards.
Individuals being assessed who have already attained MEA355 Maintain light aircraft air cycle air conditioning systems, and/or MEA356 Maintain light piston engine aircraft pressurisation systems, will have satisfied the requirements of this unit with regard to common Range of Conditions variables. The Log of Industrial Experience and Achievement records relating to MEA355 Maintain light aircraft air cycle air conditioning systems and MEA356 Maintain light piston engine aircraft pressurisation systems, may be accepted as also meeting the evidence requirements for this unit in the applicable common areas.