List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. | Remove and inspect seat and pod electrical system components | 1.1 | System is rendered safe and prepared in accordance with the applicable maintenance manual to ensure personnel safety |
| | 1.2 | Removal of electrical system components is carried out in accordance with the applicable maintenance manual while observing all relevant work health and safety (WHS) requirements, including the use of material safety data sheets (MSDS) and items of personal protective equipment (PPE) |
| | 1.3 | Removed components are inspected for visible signs of damage or deterioration in accordance with maintenance manuals and standard enterprise procedures |
| | 1.4 | Required maintenance documentation is completed and processed in accordance with standard enterprise procedures |
| | 1.5 | Removed components are tagged, packaged or discarded in accordance with specified procedures |
2. | Remove and inspect seat and pod electronic system components | 2.1 | System is rendered safe and prepared in accordance with the applicable maintenance manual to ensure personnel safety |
| | 2.2 | Removal of electronic system components is carried out in accordance with the applicable maintenance manual while observing all relevant WHS requirements, including the use of MSDS and items of PPE |
| | 2.3 | Removed components are inspected for visible signs of damage or deterioration in accordance with maintenance manuals and standard enterprise procedures |
| | 2.4 | Required maintenance documentation is completed and processed in accordance with standard enterprise procedures |
| | 2.5 | Removed components are tagged, packaged or discarded in accordance with specified procedures |
3. | Install seat and pod electrical system components | 3.1 | Electrical system components to be installed are checked to confirm correct part numbers, modification status, serviceability and shelf life |
| | 3.2 | Physical installation of electrical components is carried out in accordance with the applicable maintenance manual |
| | 3.3 | System is reinstated to correct physical condition in preparation for testing |
| | 3.4 | Required maintenance documentation is completed and processed in accordance with standard enterprise procedures |
4. | Install seat and pod electronic system components | 4.1 | Electronic system components to be installed are checked to confirm correct part numbers, modification status, serviceability and shelf life |
| | 4.2 | Physical installation of electronic components is carried out in accordance with the applicable maintenance manual |
| | 4.3 | System is reinstated to correct physical condition in preparation for testing |
| | 4.4 | Required maintenance documentation is completed and processed in accordance with standard enterprise procedures |
5. | Functionally test seat and pod electrical and electronic systems | 5.1 | Applicable system test set is connected to seat or pod in accordance with the applicable maintenance manual or approved vendor procedures |
| | 5.2 | Power is applied to the seat or pod in accordance with applicable maintenance manual |
| | 5.3 | Seat or pod electrical system is functionally tested for correct operation in accordance with the applicable maintenance manual |
| | 5.4 | Seat or pod electronic system is functionally tested using the applicable test set in accordance with the applicable maintenance manual |
| | 5.5 | Test equipment is removed and required maintenance documentation is completed and processed in accordance with standard enterprise procedures |
Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria under the specified conditions of assessment, and must include:
applying relevant WHS practices, including the use of PPE and MSDS
using approved maintenance documentation and aircraft publications relating to aircraft seat and pod electrical and electronic systems and components
recognising defects in and deterioration of electrical cables to aircraft industry standards, including crimped and soldered joints
correctly interpreting aircraft wire markings, terminal block identification and plug/socket pin numbering systems
inspecting electrical looms and harness pre and post-removal and installation to ensure minimum bends are maintained, cable is not in tension, plugs are correctly aligned, security of route ensures no chaffing of insulation, adequate clipping and cable ties have been utilised and construction complies with aircraft industry standards
positively identifying seat and pod electrical and electronic system components
plug connector pin removal and insertion where soldering is not required
recognising damage and visual defects in electrical components, such as actuators, motors and switches
recognising damage and visual defects in electronic system components, such as display screens, tuners, volume controls, audio headset receptacles and data cables.
It is essential that applicable cleanliness requirements and WHS precautions are fully observed, including awareness of electrostatic discharge procedures.
Evidence of transferability of skills and knowledge related to removal and installation is essential.
Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:
relevant WHS procedures
how to obtain relevant MSDS
the use of applicable items of PPE
component attachment methods
connection of hardware and plugs
electrical wiring used in aircraft and wire marking
plug/socket pin numbering and terminal block identification
cable and loom installation requirements, including bonding and screening
crimping tools and crimp terminals
procedures for removal and insertion of plug connector pins where soldering is not required
handling and maintenance precautions relating to electronic displays and electrostatic sensitive devices
electromagnetic environment
data cable installation requirements.
Competency should be assessed in the workplace or simulated workplace using tools and equipment specified in maintenance manuals. It is also expected that general-purpose tools, test and ground support equipment found in most routine situations would be used where appropriate.
An understanding of the attachment methods, connection of hardware and system operation as they relate to the work must be demonstrated before undertaking any action. The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards.
The following conditions of assessment represent the requirements of the Regulators (ADF and CASA) and maintenance stakeholders and must be rigorously observed.
A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements and performance criteria of the unit of competency are being achieved on the range of components and tasks listed in the Range of Conditions.
This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry Evidence Guide.
Assessors must satisfy the requirements of the National Vocational Education and Training Regulator (Australian Skills Quality Authority, or its successors).