- MEM12006C - Mark off/out (general engineering)
Assessor Resource
MEM12006C
Mark off/out (general engineering)
Assessment tool
Version 1.0
Issue Date: June 2024
This unit of competency applies to marking off/out techniques used for the transfer of dimensions from engineering drawings, prints or plans to items that are to be set up or manufactured, for example, engineering components, jigs and fixtures, castings, templates, dies and tooling.
This unit has been developed for Engineering Tradesperson - Mechanical apprenticeship training and the recognition of trade level skills in mark off/out in general engineering. Skills covered by this unit are generally applied in occupational and work situations associated with trade level fitting, machining and toolmaking work.
Marking off/out is undertaken using appropriate tools and equipment and templates are produced as required. Marking off/out techniques may apply to a range of materials and shapes.
The task may be performed in a workshop or in situ.
This unit is not intended to cover the skills used in a simple transfer of a dimension or marking a location point associated with general engineering and maintenance functions. For these skills refer to MEM07005C Perform general machining, MEM18006C Repair and fit engineering components or MEM18014B Manufacture press tools and gauges.
Where a higher level of calculation, measurement or precision work is required, see MEM30012A Use mathematical techniques and perform simple statistical computations, MEM12003B Perform precision mechanical measurement or MEM18003C Use tools for precision work, respectively.
For marking out structural fabrications and shapes, refer to MEM12007D Mark off/out structural fabrications and shapes.
This unit covers the marking out skills only. When the manufacture of templates is required, other appropriate units may need to be selected.
Band: A
Unit Weight: 4
This unit of competency covers marking off/out by transferring dimensions from engineering drawings, prints or plans to engineering items that are to be either manufactured or set up. Dimensions may be directly transferred or may require calculation from information on the drawings, prints or plans.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Prerequisites
Path 1
MEM09002B
Interpret technical drawing
MEM12023A
Perform engineering measurements
Employability Skills
This unit contains employability skills.
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | A person who demonstrates competency in this unit must be able to mark off/out in a general engineering situation. Competency in this unit cannot be claimed until all prerequisites have been satisfied. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Assessors must be satisfied that the candidate can competently and consistently apply the skills covered in this unit of competency in new and different workplace situations and contexts. Critical aspects of assessment and evidence include: examination of detailed drawings for marking out requirements and specifications including materials, measurements and tolerances, manufacturing methods, standards and code requirements correct calculation of measurements not shown on drawings sequence of measuring and/or development is determined correctly correctly establishing and marking datum points measurements are accurately transferred to component, jig, fixture, casting, template, die or tooling accurate production of templates. |
Context of and specific resources for assessment | This unit has been developed to support training in and recognition of trade level competency in marking off/out general engineering items as applied to trade level fitting, machining and toolmaking work environment. Assessment should emphasise a workplace context and procedures found in the candidate's workplace. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate. |
Method of assessment | Typically, persons engaged in Engineering Tradesperson - Mechanical work are required to apply their geometric development skills and techniques across a range of jobs and specifications. A single assessment event is not appropriate. On the job assessment should be included as part of the assessment process wherever possible. Where assessment occurs off the job, judgement must consider evidence of the candidate's performance in a productive work environment that includes a sufficient range of appropriate tasks and materials to cover the scope of application for this unit. Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials. |
Guidance information for assessment | This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with marking off/out general engineering items or other units requiring the exercise of the skills and knowledge covered by this unit. Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts. |
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Required skills |
Required skills include: determining job requirements transferring dimensions applying method and sequence of marking out making templates as required establishing datum points reading and interpreting routine information on written job instructions, specifications standard operating procedures and engineering drawings performing calculations using formulae locating, reading and interpreting information on written job instructions, specifications, drawings, charts, lists and other reference documentation checking and clarifying strategies |
Required knowledge |
Required knowledge includes: drawings, job instructions and specifications procedures for marking off/out tools, equipment and techniques related to the task purpose of establishing datum points method of determining/calculating dimensions use and application of personal protective equipment safe work practices and procedures relevant hazards and control measures related to the competency |
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Marking off/out | Marking off/out may include engineering components, jigs and fixtures, castings, templates, dies and tooling |
Tools and equipment | Tools and equipment may include: marking out tables surface tables rotary tables dividing heads vee blocks cylinder squares sine bars vernier height gauges protractors straight edge and set squares hammers scribers centre punch marking medium |
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice | Yes | No | Comments/feedback |
---|---|---|---|
Drawings, job instructions and specifications are interpreted and understood | |||
Appropriate methods and sequencing are selected consistent with proposed manufacturing process using standard operating procedures | |||
All marking off/out is carried out to specifications using appropriate tools and equipment | |||
Datum points are correctly established | |||
Dimensions are transferred and correct and appropriate calculations are used where required |
Forms
Assessment Cover Sheet
MEM12006C - Mark off/out (general engineering)
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
MEM12006C - Mark off/out (general engineering)
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent
Assessor name:
Signature:
Date:
Student signature:
Date: