- MEM18003C - Use tools for precision work
Assessor Resource
MEM18003C
Use tools for precision work
Assessment tool
Version 1.0
Issue Date: June 2024
Work is undertaken autonomously or in a team environment, using predetermined standards of quality, safety and workshop procedures.
This unit involves using a variety of tools, instruments and power equipment to perform precision tasks on a range of metallic and non-metallic materials.
As a guide, the types of precision work covered by this unit could include:
scraping machine beds to precise tolerances
broaching a tapered keyway
hand reaming the bore of a spigot or bush to a positive transition fit with shaft
core drilling (finishing) a blind locating hole to receive a mating pin
lapping a mechanical seal to fine finish
filing complex angles and mating edges
precision grinding using flex-drive attachment or similar
Inspection and preventative maintenance of tools and equipment involves the visual checking of leads and connections, sharpening of cutting equipment and the repair of associated tools.
Where precision measurement is required, Unit MEM12003B (Perform precision mechanical measurement) should also be selected.
Where precision marking out is required, Unit MEM12006C (Mark off/out [general engineering]) should also be selected.
Where specifications are interpreted from engineering drawings, detailed/technical sketches and associated documents, Unit MEM09002B (Interpret technical drawing) should also be selected.
Band: A
Unit Weight: 4
This unit covers using tools to manually produce work to precise dimensions and or finishes.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Prerequisites
Path 1
MEM12023A
Perform engineering measurements
MEM18001C
Use hand tools
MEM18002B
Use power tools/hand held operations
Employability Skills
This unit contains employability skills.
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | A person who demonstrates competency in this unit must be able to use tools to fashion or shape work to high levels of precision for dimension and or finish to specifications. Competency in this unit cannot be claimed until all prerequisites have been satisfied. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts. |
Context of and specific resources for assessment | This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate. This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with using tools for precision work or other units requiring the exercise of the skills and knowledge covered by this unit. |
Method of assessment | Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials. |
Guidance information for assessment |
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Required skills |
Look for evidence that confirms skills in: obtaining and interpreting relevant drawings, specifications, instructions etc. preparing and making safe the work area(s) prior to the work being carried out using appropriate tools to produce the specified outcomes checking tools and equipment for safe and proper working order before, during and after use where appropriate, marking unsafe or faulty tools and equipment for repair where appropriate, repairing/maintaining unsafe or faulty tools checking condition of all tools and equipment for conformance to specifications and safe and proper operation prior to storage safely storing all tools and equipment in the appropriate location |
Required knowledge |
Look for evidence that confirms knowledge of: work to be undertaken specifications to be achieved appropriate tools, processes and equipment required to carry out the work to the required specifications reasons for selecting the chosen tools, processes and equipment hazards and control measures associated with using the selected tools, processes and equipment, including housekeeping safety procedures to be followed to ensure the safety of the individual and other personnel procedures for using the selected tools engineering principles to be applied during the use of the tools manufacturers' specifications of the tools and equipment selected safe and proper function of tools and equipment selected procedures for checking tools and equipment for correct and safe operation common faults and/or defects in tools and equipment used/selected procedures for marking unsafe or faulty tools and equipment for repair repairs/operational maintenance that can be made to the tools and equipment used/selected procedures for repairing/maintaining the tools and equipment used/selected procedures for checking tools and equipment prior to storage storage location of the tools and equipment used/selected procedures for storing tools and equipment used/selected |
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Processes | Hand tools and hand held power tools are used to fashion or shape work to high levels of precision for dimension and or finish to specifications Engineering techniques, methods and procedures may include cutting out, drilling, fitting, filing, reaming, lapping, broaching, burnishing, scraping, polishing, hand held grinding, chiselling |
Precision outcomes | Specified tolerances, allowances, fits, finishes, alignments |
Tools | Any tools or equipment required to achieve precision outcomes |
Tool modifications | Tool shape, rake angle and clearance angles |
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice | Yes | No | Comments/feedback |
---|---|---|---|
Task requirements and specifications are determined and clarified with appropriate persons. | |||
Processes/techniques are selected appropriate to task, specifications and material. | |||
Tools, accessories and consumables are selected appropriate to task, specifications and material. | |||
Where applicable, cutting tool modifications required to produce outcome are determined using engineering principles. | |||
Tools/tooling are prepared and modified as required. | |||
The work area is prepared and made safe. | |||
The work piece is prepared and secured using appropriate method for selected operation/s. | |||
Tools are used according to acceptable engineering principles, methods, applications and procedures to produce specified outcome to the required accuracy. | |||
Tools and equipment are inspected for safe and proper working order before, during and after use. | |||
Unserviceable tools/equipment are identified, repaired where appropriate, or marked for repair and/or disposal, according to prescribed procedure. | |||
Tools are stored and maintained to ensure serviceability. |
Forms
Assessment Cover Sheet
MEM18003C - Use tools for precision work
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
MEM18003C - Use tools for precision work
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent
Assessor name:
Signature:
Date:
Student signature:
Date: