- MSACMG700A - Review continuous improvement processes
Assessor Resource
MSACMG700A
Review continuous improvement processes
Assessment tool
Version 1.0
Issue Date: June 2024
This unit is intended for team leaders and people with a similar sphere of influence/scope of authority and responsibility. It applies to individuals who are already familiar with change leadership in a competitive manufacturing environment through either previous study or industry experience. Where this is not the case MSACMC410A Lead change in a manufacturing environment may be completed to supply the necessary skills.
Skills covered by this unit apply to the review of existing continuous improvement processes in a team, area or department environment, or in the case of a small or medium sized manufacturer, to the whole enterprise. This unit may also be applied to service organisations applying competitive manufacturing principles.
This unit covers the local level review and further development of an existing continuous improvement process.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Employability Skills
This unit contains employability skills.
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Demonstrates skills and knowledge required to: critically review continuous improvement processes. In particular look for evidence of: ongoing review of processes development of improvement plans implementation of improvement plans. |
Context of and specific resources for assessment | Assessment may occur on the job or in an appropriately simulated environment. Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices. Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate ethnicity, age, gender, demographics and disability. Access must be provided to appropriate learning and/or assessment support when required. Where applicable, physical resources should include equipment modified for people with disabilities. |
Method of assessment | Assessment must satisfy the endorsed assessment guidelines of the Manufacturing Training Package. Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge. Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application. Assessment may be applied under project related conditions (real or simulated) and require evidence of process. Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances. Assessment may be in conjunction with assessment of other units of competency where required. |
Guidance information for assessment | Assessment processes and techniques must be culturally appropriate and appropriate to the language and literacy capacity of the candidate and the work being performed. |
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
|
Required skills |
problem solving and decision making communication across all levels in an organisation the ability to analyse current state/situation the ability to analyse workplace strategy and vision statements and principles and to link these to current processes, performance and indicators |
Required knowledge |
competitive manufacturing principles competitive manufacturing tools, their applications and limitations methods of determining competency gaps continuous improvement processes types of KPIs and their impacts on performance relationship between maintenance and continuous improvement |
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Codes of practice/standards | Where reference is made to industry codes of practice, and/or Australian/international standards, the latest version must be used |
Health, safety and environment (HSE) | All changes implemented should be at least neutral, or preferably beneficial, in their impact on health, safety and environment |
Organisation | Organisation includes: any part of a manufacturing or service organisation companies, government bodies or other body of people aiming to produce a product to service a customer |
Relevance | Relevance of KPIs includes: appropriateness - did they lead to/encourage desirable performance currency - are they still encouraging desirable performance unintended consequences - do they lead to outcomes which are not desirable (even if some performance is desirable) signal/noise - is the balance between desirable and undesirable outcomes strong and positive |
Compare outcomes | Outcomes include comparing: cost/benefit timing value chain implications HSE issues process reliability issues benefit to customer/perceived customer value |
Competitive philosophy | Competitive philosophy includes that body of knowledge and techniques which together guides an organisation towards achieving best practice in their processes and includes knowledge and techniques listed under various titles such as: manufacturing practice lean manufacturing agile manufacturing |
Required resources | Required resources include: plant materials (raw materials, components, work in progress, other consumables) energy (heating, cooling, fuel) people skills finances feedback/visual factory resources measuring equipment |
Sustaining improvement | Improvement may be sustained by including it in: standard procedures and work instructions standard practice other relevant documents and practices |
Team leader | Team leader may include: any person who may have either a permanent or an ad hoc role in facilitating the function of a team in a workplace |
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice | Yes | No | Comments/feedback |
---|---|---|---|
Review performance against current key performance indicators (KPIs) | |||
Review KPIs for ongoing relevance | |||
Review current state of continuous improvement processes | |||
Audit health, safety and environment (HSE) changes as a result of continuous improvement activity | |||
Analyse problems to determine root cause/s | |||
Identify areas for improvement to KPIs and continuous improvement processes | |||
Prioritise areas requiring action | |||
Develop a range of possible solutions including taking into account the impact of the solution on any codes of practice, standards, contracts, commercial or industrial agreements | |||
Discuss possible solutions and implications with stakeholders | |||
Compare outcomes from possible solutions to competitive philosophy | |||
Choose actions which are most compatible with competitive philosophy | |||
Draft implementation plan for chosen action | |||
Obtain required approvals and modify plan as required | |||
Communicate changes to improvement processes to team members | |||
Resolve issues and problems identified by team members | |||
Obtain sign off from process/system owner | |||
Arrange for skills development as necessary | |||
Arrange for required resources to be available | |||
Establish and implement KPIs for modified continuous improvement process | |||
Implement planned changes | |||
Check the planned improvements have occurred | |||
Take action to sustain improvement by standardising |
Forms
Assessment Cover Sheet
MSACMG700A - Review continuous improvement processes
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
MSACMG700A - Review continuous improvement processes
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent
Assessor name:
Signature:
Date:
Student signature:
Date: