List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Plan and prepare for work | 1.1 | Work health and safety (WHS) requirements, legislative requirements and workplace practices are observed throughout the work |
1.2 | Personal protective equipment is selected and used |
1.3 | Type of pelmet to be constructed is identified from work order |
1.4 | Tools and equipment are selected and checked for safe operation |
1.5 | Materials and hardware are identified and selected |
1.6 | Work sequence is planned to conform with quality requirements, minimise time and economically use materials |
2 | Prepare and assemble pelmet components | 2.1 | Components are measured and cut to specification and laid out ready for assembly |
2.2 | Components are assembled according to work instructions |
2.3 | Problems occurring during work operations are identified and reported following workplace practices |
3 | Complete work | 3.1 | Completed work is cleaned, packaged and stored according to workplace practices |
3.2 | Tools and equipment are cleaned, maintained and stored |
3.3 | Faulty tools and equipment are tagged and reported to appropriate personnel |
3.4 | Work area is cleaned and waste is disposed of in accordance with industry and enterprise specific policies and procedures |
3.5 | Workplace documentation is completed |
Interpret work order, locate materials and use information to complete tasks in constructing pelmets
Apply safe handling practices and safe operating procedures for equipment, products and materials to:
minimise the risk of injury to self or others
prevent damage to goods, equipment and products
Identify materials and equipment used in constructing pelmets
Select, set up and maintain equipment in accordance with manufacturer specifications and workplace practices
Report material faults, damaged products or equipment
Cut component materials according to work orders to within +/- 1 mm and construct a minimum of four (4) pelmets suitable for four (4) different style of internal blinds
Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures
Avoid backtracking, work flow interruptions or wastage
Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity
State or territory WHS legislation, regulations, standards and codes of practice relevant to the full range of processes for constructing pelmets
Organisational and site standards, requirements, policies and procedures for constructing pelmets
Environmental protection requirements relating to the disposal of waste material
Established communication channels and workplace/worksite protocols
Relevant problem identification and resolution
Types of tools and equipment and procedures for their safe use, operation and maintenance
Cutting patterns and sequences
Cutting tool condition assessment
Terms used to describe components of pelmets
Storage systems and labelling
Procedures for the recording, reporting and maintenance of workplace records and information
Appropriate mathematical procedures for estimation and measurement
Assessors must:
hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or it successors
have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification
be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.
Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.
Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.
Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.
Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.
Access is required to a location relevant to constructing pelmets; and workplace practices, including standard operating procedures and work instructions for constructing pelmets.