List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
There must be evidence the candidate has completed the tasks outlined in the elements, performance criteria, and foundation skills of this unit, which must include the ability to:
safely and correctly install one of each of the following types of exterior awnings:
one manual pull-down awning for a residential building
one motorised roll-up awning for a commercial building
one awning for a residential building that is either a metal hooded canopy or a textile canopy
one folding-arm awning for a commercial building that is fitted with an electric wind sensor control device.
One of the above installations must be above ground level and demonstrate the safe and correct use of lifting equipment.
One of the above motorised control devices must be a 240V device connected to mains power; and one a 12V rechargeable solar or battery-operated device.
In the course of each of the above installations, the person must:
interpret work order and locate components, materials, tools and equipment required for the installation
apply safe lifting and handling procedures
follow work instructions and safe operating procedures to:
minimise risk of injury to self and others
prevent damage to site, tools, equipment and products
maintain required production output and quality
use fixing hardware, hand and power tools safely
use personal protective equipment (PPE)
use and dispose of waste sustainably
avoid backtracking, work flow interruptions, and wastage
identify and resolve routine problems and faults encountered
work with others, recognising dependencies and using cooperative approaches to optimise work flow and productivity.
In installing the suite of awnings, the candidate must demonstrate the ability to:
install in at least two of the following different openings:
door or window
sliding door
wide-span opening 3 metres or above
fasten to at least two of the following different surfaces:
aluminium
concrete
masonry
plasterboard
steel
timber.
There must be evidence the candidate has knowledge of:
features of installation work orders and supplier instructions relating to the types of awnings in the performance evidence, and how to identify and interpret key information
work order requirements, and industry-accepted quality indicators and requirements, relating to installations described in performance evidence:
key requirements of Australian standards and codes of practice for individual installers
building code requirements specific to installation described in performance evidence
safety considerations and potential dangers associated with incorrect installation
wind zoning requirements
operation and maintenance requirements of awnings in performance evidence
emerging trends in installing awnings, including new materials used in face, reveal and packing and their associated energy ratings and fire retardant attributes
work health and safety (WHS) procedures, practices and regulations specific to installations described in performance evidence:
controlling hazards and risks
eliminating hazardous materials and substances
managing rain and wind resistance during installation
using firefighting equipment and first aid equipment
operating lifting equipment
using personal protective equipment
workplace procedures relating to:
communicating work requirements with customers
scheduling installation
accessing and inspecting installation sites
manual handling, including lifting and carrying
safely installing and fastening awnings
tagging and reporting faulty tools and equipment
disposing of waste safely and in an environmentally sustainable manner
recycling and re-use guidelines
cleaning and storing tools and equipment
storing surplus unused items
recording and reporting installation information
presenting invoices, and collecting and receipting payments
techniques for installing electric and manual control devices:
electric, including radio-controlled remote devices and photocell sensor devices using 240V mains power, and 12V rechargeable solar and battery-operated control
manual, including wands and pull sticks
effect of site characteristics and access restrictions on installation equipment selection and use
techniques for installing and fastening awnings described in performance evidence, including:
in openings made of:
aluminium
concrete
masonry
plasterboard
steel
timber
installing and fixing that:
conform to quality requirements
comply with supplier instructions and manufacturer specifications
maximise the appearance of the finished work
provide for the most economical use of materials and labour
mathematical methods for estimating and measuring installation openings, including factoring in required tolerances
requirements and procedures for using qualified licensed electricians when installation and control devices involve mains power
types of common problems that occur during installation, and how to avoid and respond
types, characteristics, uses, maintenance and limitations of the following items required for the installations described in performance evidence:
awning products and materials
special application brackets
operating mechanisms required for type of awnings being installed, including radio-controlled remote devices and photocell sensor devices
specialised fixing hardware used for the different types of awnings:
Dyna Bolts
masonry anchors
mounting brackets
nuts and bolts
screws, including hex screws
tools and equipment:
hand tools, including drills, screwdrivers, hex keys and snip cutters
power tools, including 240V mains connected and 12V rechargeable solar and battery-operated
equipment, including ladders, drop sheets, barriers, cones, signs and lifting equipment
documentation requirements for installation work described in performance evidence.
Assessment must occur in the workplace, or in a simulated environment that reflects workplace conditions and contingencies.
Access is required to tools, materials, equipment and specifications for the installation described in the performance evidence above, including:
awnings requiring installation as specified in the performance evidence
PPE applicable to job requirements
WHS documentation specific to the installation
fixing hardware, tools and equipment specified in the knowledge evidence
control devices for awnings being installed
workplace documentation required for each installation, including:
work orders, customer orders, job cards and work quotations
workplace procedures specified in the knowledge evidence
supplier instructions and manufacturer specifications
customer care cards
customer invoices and receipts
time sheets.
Assessors of this unit must satisfy the assessor requirements in applicable vocational education and training legislation, frameworks and/or standards.