List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Prepare for work | 1.1 | Applicable work health and safety (WHS), legislative and organisational requirements and instructions relevant to lathe operations are verified and complied with |
1.2 | Work instructions are used to determine job requirements including design, quality, materials, equipment and quantity |
1.3 | Material for turning is selected and inspected for safety |
1.4 | The wood-turning lathe, holding devices, tools and gauges are identified and checked for safe and efficient operations |
1.5 | Procedures are determined for minimising waste |
1.6 | Procedures are identified for maximising energy efficiency while completing the job |
2 | Set up machines with holding devices | 2.1 | Lathe speed is selected in accordance with job requirements, safety considerations and manufacturer recommendations |
2.2 | Holding devices are mounted in accordance with job requirements and safety considerations |
2.3 | Necessary gauges and tools are selected for job |
3 | Operate lathe | 3.1 | Lathe start-up instructions are carried out in accordance with manufacturer instructions |
3.2 | Material is mounted in lathe in accordance with manufacturer instructions, safe handling procedures and standard workplace operating procedures |
3.3 | Lathe is operated in accordance with its designed capacity, purpose and to manufacturer recommendations |
3.4 | Lathe operation is monitored to ensure produce quality and output |
3.5 | Waste quantities are checked and minimised |
3.6 | Items that do not meet quality requirements are repaired, recycled or discarded according to workplace procedures |
3.7 | Problems with the required work and/or operation of the machine are identified and reported to the appropriate person |
4 | Clean up work area and maintain equipment | 4.1 | Materials that can be re-used are collected and stored |
4.2 | Waste and scraps are removed following workplace procedures |
4.3 | Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures |
4.4 | Unserviceable equipment is tagged and faults identified in accordance with workplace procedures |
4.5 | Operator maintenance is completed in accordance with manufacturer specifications and workplace procedures |
Collect, organise and understand information related to furnishing work instructions and work orders and safety procedures
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Identify materials used in the work process
Follow work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to goods, equipment and products
maintain required production output and product quality
Identify, set up and maintain holding devices, safe speed selection and balance limitations to complete:
freehand turn articles between centres that have multiple axis
a minimum of eight (8) hand turned articles to detail between centres
manufacture of templates and gauges
scroll cut material prior to turning
a minimum of four (4) hand turned articles to detail with grain at 90° to the axis of the lathe
Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements
Lead others and work effectively to improve production quality and outcomes
Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures
Use workplace technology related to the coordination, including communication equipment, time and management aids and other measuring devices
Minimise wastage of resources, including materials, time and money
Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity and encourage participation of employees in the planning of work activities and changes
State or territory WHS legislation, regulations, standards and codes of practice relevant to wood-turning
Terminology covering wood-turning operations and materials
Types, characteristics, used and limitations of timber species for wood-turning
Techniques for the design and documentation of specifications for wood-turned products
Organisational and site standards, requirements, policies and procedures for turning of wood
Types, characteristics, uses, limitations and maintenance requirements of the range of tools used in wood-turning
Processes for evaluating the quality of wood-turning tools in terms of specifications, safety, maintainability and commercial reputation
Range of commonly used wood-turning techniques
Established communication channels and protocols
Relevant lathe and wood-turning problem identification and resolution
Workplace safety requirements and WHS legislation
Work flow within the workplace
Assessors must:
hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors
have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification
be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.
Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.
Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.
Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.
Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.
Access is required to significant wood turning requirements, including design brief or specification, a range of optional timbers, a range of quality wood turning tools, materials and specifications for the preparation of the product for finishing.