List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Plan and prepare work | 1.1 | Work instructions are used to determine job requirements, including design, colour, finish process and quality |
1.2 | Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work |
1.3 | Colour matching aids and colouring materials are accessed and readied for use |
1.4 | Types of colouring materials are identified and prepared for colouring task |
1.5 | Tools, equipment and accessories are identified and checked for safe and effective operation |
2 | Match colours | 2.1 | Surfaces are cleaned and prepared to enable accurate colour matching |
2.2 | Characteristics of the surface and the impact of these on colouring are taken into account |
2.3 | Techniques for colour application are identified and selected according to workplace practices |
2.4 | Properties of colouring agents are assessed in relation to the specific circumstances |
2.5 | Colour matching techniques are applied to identify most likely fit in terms of product, colour and application techniques |
2.6 | Colour matching outcomes are confirmed through trials of proposed products, colours and application techniques |
2.7 | Colour matching formulae are recorded to enterprise or industry standards |
3 | Make up colours | 3.1 | Product quantities are identified from client demand or accurate assessment of coating/colouring requirement |
3.2 | Colouring additives are calculated from manufacturer specifications |
3.3 | Colouring additives are accurately measured and blended with the base product |
4 | Apply colours | 4.1 | Colour solution is applied in accordance with selected application techniques and workplace procedures |
4.2 | Colour application is constantly checked against sample colour |
4.3 | Surface is inspected for faults in applied colour film and defects are rectified |
4.4 | Coloured or matched up surface is sealed with finishing material in accordance with job specification and workplace procedures |
5 | Clean up work area | 5.1 | Colouring materials are stored and labelled ready for next process |
5.2 | Waste and unwanted material is disposed of safely and in accordance with relevant environmental regulations |
5.3 | Unused materials are sealed and stored |
5.4 | Tools and equipment are cleaned, maintained and stored |
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Identify materials used in the work process
Follow work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to goods, equipment and products
maintain required production output and product quality
Accurately colour match using pigments and/or stains on a minimum of five (5) occasions
Record colour formulae for production situations
Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements
Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures
Minimise wastage of resources, including materials, time and money
Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity
Types, characteristics and degradation patterns of coatings and stains
Properties of coated and stained surface materials and the impact of these on colouring
Types, characteristics, uses and limitations of colouring agents
Types, uses and limitations of matching aids
Product catalogues and other information systems
Material safety management systems and related safety requirements
Assessors must:
hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors
have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification
be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.
Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.
Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.
Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.
Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.
Access is required to sample colouring requirements, colouring agents, base coating products, mixing and testing equipment, and cleaning equipment and materials.