This unit describes the skills and knowledge required to set out, cut, lay and fix pre-finished, engineered or solid direct stick timber flooring within a space to a hard underlay base or subfloor.
This unit applies to flooring technicians installing timber flooring in accordance with pre-determined work orders.
Licensing, legislative or certification requirements may apply to this unit and relevant state/territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking flooring work. Industry standards and codes of practice within Australia must also be applied. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Identify and follow work health and safety, legislative and organisational requirements
Correctly identify work requirements and process from review of documentation
Confirm subfloor suitability for installation consistent with Australian Standards and manufacturer recommendations
Select underlays adhesives, trims and accessories based on job requirements
Select and check tools, equipment and materials prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition
Plan sequence of work, including the starting point, to ensure efficiency and quality of installation.
Check flooring against work order and acclimatise in accordance with manufacturer recommendations
Organise pre-finished, engineered or direct stick timber flooring for fixing and use in accordance with relevant safety management requirements
Remove or undercut skirting boards or cover trims, if required, and store for re-fitting or send for machining in accordance with job requirements
Prepare required adhesives and accessories for use in accordance with manufacturer instructions
Establish working lines and starting point
Follow instructions and sequence for laying and fixing
Lay appropriate underlay in accordance with manufacturer recommendations
Lay out flooring to meet directional sequence, pattern match, specification requirements, and minimising waste and joins
Maximise the aesthetics of materials, where appropriate, by matching grains and colours
Accurately and clearly mark flooring for cutting
Cut timber flooring to length and size for final laying ensuring minimum waste.
Organise materials for fixing and use in accordance with safety management requirements
Prepare required adhesives and accessories for use
Use fixing methods and equipment in accordance with manufacturer recommendations
Allow appropriate field and perimeter expansion joints
Fit and/or re-fit skirting boards or cover trims and finish in accordance with job requirements
Inspect finished job and rectify any imperfections in accordance with workplace procedures
Store and recycle unused materials in accordance with workplace procedures
Check, clean and store tools and equipment in accordance with workplace procedures