List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Prepare for work | 1.1 | Applicable work health and safety (WHS), legislative and organisational requirements relevant to the production of curved and shaped components for custom furniture are verified and complied with |
| | 1.2 | Instructions or plans are read and interpreted to identify process required to complete work tasks |
| | 1.3 | Production materials are identified, evaluated and selected |
| | 1.4 | Tools and equipment are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition |
| | 1.5 | Techniques for bending, forming and shaping components are identified, evaluated and selected for the particular applications |
| | 1.6 | Sequence of work is planned, including the starting point, to ensure efficiency and quality of construction |
| | 1.7 | Quality checking procedures are developed and documented for each step in the production process |
2 | Complete construction | 2.1 | Component specifications are set out according to work instructions and materials marked according to industry practices |
| | 2.2 | Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications |
| | 2.3 | Material bending, forming and shaping are undertaken in accordance with the production plan |
| | 2.4 | Components are checked against specified tolerances, fit and accuracy |
3 | Finalise the work sequence | 3.1 | The product is prepared for finishing in accordance with the design specification |
| | 3.2 | Carving tools are cleaned, maintained and stored in accordance with manufacturer specification |
| | 3.3 | Work area is cleared and waste removed |
| | 3.4 | Workplace documentation and/or reports are completed |
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Follow work instructions, operating procedures and inspection practices to:
prevent damage to goods, equipment and products
maintain required production output and product quality
minimise the risk of injury to self and others
Produce a minimum of six (6) significant timber curved components, five (5) from solid timber and one (1) using ply:
one (1) involving shaping from solid timber using hand techniques
one (1) involving shaping from solid timber using machine techniques
one (1) involving laminating
one (1) involving use of heat/steam
one (1) involving other techniques
items must demonstrate appropriate design, use of materials and strength for purpose
Conduct operator maintenance on machines and related tools and equipment
Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate other material requirements
Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures
Minimise wastage of resources, including materials, time and money
Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity
State or territory WHS legislation, regulations, standards and codes of practice relevant to the production of curved and shaped components for custom furniture
Organisational and site standards, requirements, policies and procedures for the production of curved and shaped components for custom furniture
Techniques for timber bending, forming and shaping
Types, characteristics, uses, limitations and maintenance requirements of solid timbers commonly used in furniture production
Types, characteristics, uses and limitations on hand and power tools used in timber bending, forming and shaping
Interpretation of plan representations of furniture design
Techniques for the preparation of drawings/set-outs/rods and geometrical concepts
Environmental protection requirements
Established communication channels and protocols
Relevant problem identification and resolution
Work flow within the workplace
Assessors must:
hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors
have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification
be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.
Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.
Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.
Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.
Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.
Access is required to realistic curved and shaped component tasks, materials and equipment relevant to production of curved and shaped components for custom furniture, and specifications and work instructions.