List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Prepare for software installation | 1.1 | Program format and operational intent is accurately determined and required applications identified |
| | 1.2 | Specifications are checked for required operating conditions |
| | 1.3 | Program instructions are checked for compliance with specifications |
| | 1.4 | Software timers are set to specification where required |
2 | Install automatic process machine control program | 2.1 | Appropriate program loading technique is selected |
| 2.2 | External loading devices are correctly connected to automatic process machine control systems |
| | 2.3 | Machine control system is placed in correct operational mode to accept program loading |
| | 2.4 | Program is downloaded in accordance with manufacturer recommended procedures and enterprise requirements |
| | 2.5 | Checks are made during and after downloading to ensure accurate and complete data transfer |
| | 2.6 | External program loading devices and connections are disconnected from process and machine control system |
3 | Commission automatic process and machine control program | 3.1 | Operation of the equipment using the program is observed |
| 3.2 | Outputs are checked and measured for compliance with specifications |
| 3.3 | External inputs are checked for compliance with specifications according to specified procedures |
| | 3.4 | Total operation is checked for compliance with specifications where applicable |
| | 3.5 | Location of program master copy storage is confirmed |
Collect, organise and understand information related to multi-trade work instructions and work orders, building and structural plans and safety procedures
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Identify materials used in the work process
Follow work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to goods, equipment and products
maintain required production output and product quality
Install and commission CNC software on at least two (2) different machines and:
identify requirements of tasks and organise work to achieve goals and results
select and install software programs for the CNC equipment
select and apply appropriate loading techniques
check and adjust machine operations and programming
suggest improvements
Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements
Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures
Use workplace technology related to the coordination, including communication equipment, time and management aids and other measuring devices
Avoid backtracking, work flow interruptions or wastage
Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity
Computer science theory relevant to CNC machine operation
CNC control system characteristics, applications and limitations
Procedures and techniques for programming CNC equipment
Operation requirements of equipment and work systems to be programmed
Assessors must:
hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors
have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification
be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.
Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.
Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.
Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.
Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.
Access is required to CNC equipment, software and production materials.