List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Develop prototype specifications | 1.1 | The purpose and outline requirements for the prototype are identified from design concepts and/or customer requirements |
| | 1.2 | Materials are identified following detailed analysis of the options |
| | 1.3 | Detailed prototype design specifications are prepared and documented |
| | 1.4 | Construction requirements and methods are identified appropriate for the materials to be used |
| | 1.5 | Ergonomic requirements are identified, clarified and satisfied throughout the work process |
2 | Plan and prepare prototype construction | 2.1 | Work plan for the prototype construction is drafted |
| 2.2 | Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work |
| | 2.3 | Compatibility of materials in specifications is checked and any discrepancies reported |
| | 2.4 | Steps or stages in construction are identified, noting checkpoints for quality checks |
| | 2.5 | Suitable work area is located and cleared ready for work |
| | 2.6 | Materials and consumables to meet specifications are prepared for use |
| | 2.7 | Equipment and accessories suitable for working the specified material are prepared for use |
| | 2.8 | Appropriate jigs and other construction aids are identified and where required adjusted to suit the work |
3 | Produce the prototype | 3.1 | Work plan is followed to produce the prototype |
| 3.2 | Checks are conducted at the identified points |
| | 3.3 | Modifications to designs and plans are identified and recommended and managed within workplace procedures |
| | 3.4 | Modifications to the plan are documented and followed |
| | 3.5 | Prototype or sample is checked for compliance with specifications |
4 | Trial and evaluate the prototype | 4.1 | Trial objectives and processes are developed, specified and documented |
| | 4.2 | Personnel involved in the trial and evaluation are prepared for their responsibilities and functions |
| | 4.3 | Trial equipment, tools and materials are prepared and certified prior to use |
| | 4.4 | Prototype trials are conducted and results captured and recorded in accordance with the trial specification |
| | 4.5 | Results of trials are evaluated and evaluation records and recommendations are processed in accordance with enterprise procedures |
Collect, organise and understand information related to furnishing work instructions and work orders and safety procedures
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Identify materials used in the work process
Follow work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to goods, equipment and products
maintain required production output and product quality
Develop and evaluate a minimum of two (2) different prototypes, and:
develop the prototype specification
identify compatibility/incompatibility of materials, adhesives, fittings and fasteners for the application
select and use appropriate materials, equipment and processes for the item being constructed
demonstrate how the design of the prototype components will influence the working lifetime of the item
ensure that the prototype satisfies the original or varied specification
prepare for and conduct evaluation trials
record outcomes and make recommendations for future activities
Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements
Lead others and work effectively to improve production quality and outcomes
Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures
Use workplace technology related to the coordination, including communication equipment, time and management aids and other measuring devices
Avoid backtracking, work flow interruptions or wastage
Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity and encourage participation of employees in the planning of work activities and changes
Intellectual property law requirements
Elements and principles of design
Trends and detailed knowledge of furniture construction
Destructive and non-destructive testing techniques and processes
Use of colour and other features
Range, properties and characteristics of materials used in the furnishing industry
Safety and environmental aspects of relevant enterprise activities
Workplace procedures and reporting process
Relevant WHS legislation, regulatory requirements and codes of practice
Assessors must:
hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors
have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification
be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.
Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.
Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.
Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.
Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.
Access is required to information on design concepts, customer requirements, quality standards and organisation procedures.