Assessor Resource

MSFGG2017
Fabricate and install insect and security screens

Assessment tool

Version 1.0
Issue Date: May 2024


This unit describes the skills and knowledge required to measure, fabricate and install insect or security screens for doors or windows using aluminium.

No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Performance Criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1 Plan for work

1.1 Determine specifications of insect or security screen from work instructions, including the identification of its pattern or plan

1.2 Identify and apply work health and safety requirements relevant to fabrication and installation of aluminium screens, including personal protective equipment

1.3 Identify fabrication and installation processes to meet specifications

1.4 Calculate quantities of materials required from plans, work instructions and measurement of screen opening in accordance with Australian Standards and industry practice

1.5 Prepare cutting lists from plans, work instructions and measurements of opening to meet specifications and minimise waste

1.6 Select fittings, fixings and joining devices or materials in accordance with specifications or type of materials to be joined or fixed

2 Prepare for work

2.1 Determine logical work sequence to suit the work and workplace procedures

2.2 Assemble tools, equipment and materials and check they are appropriate for the work, serviceable and in a safe condition

2.3 Check size, quantity, finish and profile of components against specifications

3 Fabricate and install insect or security screen

3.1 Measure and mark materials to cutting list requirements and to achieve most economical use of materials

3.2 Cut and stamp materials to cutting list requirements and in accordance with workplace procedures or industry practice

3.3 Assemble components of insect or security screen in accordance with workplace procedures or industry practice

3.4 Attach fittings to screen in accordance with workplace procedures or industry practice

3.5 Install insect or security screen in opening in accordance with recognised industry standards

4 Complete work

4.1 Inspect installed insect or security screen to identify any quality defects

4.2 Repair, refabricate or reinstall insect or security screen to rectify defects

4.3 Collect and store any material which can be reused

4.4 Remove waste and scrap materials and process for disposal or recycling in accordance with workplace procedures

4.5 Clean work area and dispose of rubbish

4.6 Clean and store tools, equipment and unused material in accordance with workplace procedures

4.7 Complete workplace documentation in accordance with workplace procedures

There must be evidence the candidate has completed the tasks outlined in the elements and performance criteria of this unit, and demonstrated the ability to:

measure, fabricate and install one hinged aluminium screen door, one sliding aluminium screen door and one aluminium window screen

safely use at least three of the following:

drop saw

up-cut saw

stamping and notching tools

copy routers

end millers

crimpers

electric or pneumatic powered drills and screwdrivers

pop rivet guns

welding machine.

There must be evidence the candidate has knowledge of:

workflow requirements in relation to the fabrication and installation of insect and security screens

characteristics and application of materials and fittings used in fabrication and installation of screens including:

extruded door framing

corner stakes

interlocks

fly mesh

heavy-duty security mesh

emergency escape security screen

fittings and fixing/fasteners (screws and pop rivets)

anti-jemmy protection hardware

hinges

wheels

lock mechanisms that comply with Australian Standards

door closures

lock guards

workplace safety system requirements related to fabricating and installing aluminium insect and security screens

relevant Australian Standards relating to security screen doors and security window grilles.

Skills must have been demonstrated in the workplace or in a simulated environment that reflects workplace conditions and contingencies. The following conditions must be met for this unit:

use of suitable facilities, equipment and resources, including those specified in the performance evidence

modelling of industry operating conditions.

Assessors must satisfy the NVR/AQTF mandatory competency requirements for assessors.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Performance Criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1 Plan for work

1.1 Determine specifications of insect or security screen from work instructions, including the identification of its pattern or plan

1.2 Identify and apply work health and safety requirements relevant to fabrication and installation of aluminium screens, including personal protective equipment

1.3 Identify fabrication and installation processes to meet specifications

1.4 Calculate quantities of materials required from plans, work instructions and measurement of screen opening in accordance with Australian Standards and industry practice

1.5 Prepare cutting lists from plans, work instructions and measurements of opening to meet specifications and minimise waste

1.6 Select fittings, fixings and joining devices or materials in accordance with specifications or type of materials to be joined or fixed

2 Prepare for work

2.1 Determine logical work sequence to suit the work and workplace procedures

2.2 Assemble tools, equipment and materials and check they are appropriate for the work, serviceable and in a safe condition

2.3 Check size, quantity, finish and profile of components against specifications

3 Fabricate and install insect or security screen

3.1 Measure and mark materials to cutting list requirements and to achieve most economical use of materials

3.2 Cut and stamp materials to cutting list requirements and in accordance with workplace procedures or industry practice

3.3 Assemble components of insect or security screen in accordance with workplace procedures or industry practice

3.4 Attach fittings to screen in accordance with workplace procedures or industry practice

3.5 Install insect or security screen in opening in accordance with recognised industry standards

4 Complete work

4.1 Inspect installed insect or security screen to identify any quality defects

4.2 Repair, refabricate or reinstall insect or security screen to rectify defects

4.3 Collect and store any material which can be reused

4.4 Remove waste and scrap materials and process for disposal or recycling in accordance with workplace procedures

4.5 Clean work area and dispose of rubbish

4.6 Clean and store tools, equipment and unused material in accordance with workplace procedures

4.7 Complete workplace documentation in accordance with workplace procedures

There must be evidence the candidate has completed the tasks outlined in the elements and performance criteria of this unit, and demonstrated the ability to:

measure, fabricate and install one hinged aluminium screen door, one sliding aluminium screen door and one aluminium window screen

safely use at least three of the following:

drop saw

up-cut saw

stamping and notching tools

copy routers

end millers

crimpers

electric or pneumatic powered drills and screwdrivers

pop rivet guns

welding machine.

There must be evidence the candidate has knowledge of:

workflow requirements in relation to the fabrication and installation of insect and security screens

characteristics and application of materials and fittings used in fabrication and installation of screens including:

extruded door framing

corner stakes

interlocks

fly mesh

heavy-duty security mesh

emergency escape security screen

fittings and fixing/fasteners (screws and pop rivets)

anti-jemmy protection hardware

hinges

wheels

lock mechanisms that comply with Australian Standards

door closures

lock guards

workplace safety system requirements related to fabricating and installing aluminium insect and security screens

relevant Australian Standards relating to security screen doors and security window grilles.

Skills must have been demonstrated in the workplace or in a simulated environment that reflects workplace conditions and contingencies. The following conditions must be met for this unit:

use of suitable facilities, equipment and resources, including those specified in the performance evidence

modelling of industry operating conditions.

Assessors must satisfy the NVR/AQTF mandatory competency requirements for assessors.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Determine specifications of insect or security screen from work instructions, including the identification of its pattern or plan 
Identify and apply work health and safety requirements relevant to fabrication and installation of aluminium screens, including personal protective equipment 
Identify fabrication and installation processes to meet specifications 
Calculate quantities of materials required from plans, work instructions and measurement of screen opening in accordance with Australian Standards and industry practice 
Prepare cutting lists from plans, work instructions and measurements of opening to meet specifications and minimise waste 
Select fittings, fixings and joining devices or materials in accordance with specifications or type of materials to be joined or fixed 
Determine logical work sequence to suit the work and workplace procedures 
Assemble tools, equipment and materials and check they are appropriate for the work, serviceable and in a safe condition 
Check size, quantity, finish and profile of components against specifications 
Inspect installed insect or security screen to identify any quality defects 
Repair, refabricate or reinstall insect or security screen to rectify defects 
Collect and store any material which can be reused 
Remove waste and scrap materials and process for disposal or recycling in accordance with workplace procedures 
Clean work area and dispose of rubbish 
Clean and store tools, equipment and unused material in accordance with workplace procedures 
Complete workplace documentation in accordance with workplace procedures 
Measure and mark materials to cutting list requirements and to achieve most economical use of materials 
Cut and stamp materials to cutting list requirements and in accordance with workplace procedures or industry practice 
Assemble components of insect or security screen in accordance with workplace procedures or industry practice 
Attach fittings to screen in accordance with workplace procedures or industry practice 
Install insect or security screen in opening in accordance with recognised industry standards 
Inspect installed insect or security screen to identify any quality defects 
Repair, refabricate or reinstall insect or security screen to rectify defects 
Collect and store any material which can be reused 
Remove waste and scrap materials and process for disposal or recycling in accordance with workplace procedures 
Clean work area and dispose of rubbish 
Clean and store tools, equipment and unused material in accordance with workplace procedures 
Complete workplace documentation in accordance with workplace procedures 

Forms

Assessment Cover Sheet

MSFGG2017 - Fabricate and install insect and security screens
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MSFGG2017 - Fabricate and install insect and security screens

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: