List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Identify and plan work requirements | 1.1 | Work requirements in the form of type, pattern/plan and quantity of mirrors or glass splashbacks to be prepared and installed are identified from work instructions |
| | 1.2 | Work health and safety (WHS) requirements for fabrication and installation of mirrors and glass splashbacks, including personal protective equipment, are observed throughout the work |
| | 1.3 | Work sequence is planned in a logical order to suit the job and workplace procedures |
| | 1.4 | Quantities of materials required are calculated from plans or work instructions or by measuring the installation site |
| | 1.5 | Fixing and joining devices or materials are selected in accordance with specifications or type of materials to be joined and the surface on which the mirror or splashback is to be installed |
| | 1.6 | Tools and equipment suitable to the work method are identified |
2 | Prepare for work | 2.1 | Compatible materials, fixings, fasteners, tools and equipment needed to complete the work are selected and checked prior to use to ensure they are appropriate for the work, serviceable and in a safe condition |
| | 2.2 | Components of the mirror or splashback are checked against specifications or job order for size, quantity, finish and profile |
3 | Fabricate and install mirrors and glass splashbacks | 3.1 | Frame, if required, is fabricated in accordance with workplace procedures or industry practice |
| | 3.2 | Mirror or splashback glass is cut to size in accordance with workplace procedures and industry practice |
| | 3.3 | Mirror or splashback is edge worked, if required, in accordance with workplace procedures or industry practice |
| | 3.4 | Holes, where required, are drilled in frame, mirror or splashback in accordance with the plan, workplace procedures and industry practice |
| | 3.5 | Glass splashbacks are finished according to customer specifications |
| | 3.6 | Mirror or splashback is installed using appropriate fixing method in accordance with workplace procedures and industry practice |
4 | Complete work | 4.1 | Installed mirror or splashback is inspected for quality of work and repaired, re-fabricated or reinstalled, as required, in accordance with workplace procedures |
| | 4.2 | Waste, unused and scrap material are removed for disposal or recycling, as required |
| | 4.3 | Work area is cleaned and rubbish disposed of, as appropriate |
| | 4.4 | Tools, equipment and unused materials are removed and stored appropriately according to workplace requirements |
| | 4.5 | Workplace documentation is completed in accordance with workplace procedures |
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Identify materials used in the work process
Follow work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to goods, equipment and products
maintain required production output and product quality
Measure for mirror and glass splashback installations and cut mirror and glass up to 8 mm, including vinyl-backed
Carry out edge working
Prepare walls for installation of mirrors and glass splashbacks
Construct and fit mirrors and glass splashbacks, which may include frames
Cut and drill holes in mirrors and glass splashbacks to cut-out specifications
Identify and use spirit and/or laser levels to set plumb and level lines
Fit framed and/or unframed, wall, safety and/or security mirrors, including return mirrors with minimal deflection
Finish and fit glass splashbacks to specification and clean and present finished mirrors and/or glass splashbacks
Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements
Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures
Avoid backtracking, work flow interruptions or wastage
Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity
Work flow requirements in relation to the processing and installation of mirrors
Workplace safety system requirements related to the processing and installation of mirrors and glass splashbacks
Characteristics of materials used and uses of products produced
Identification of equipment, processes and procedures related to the fabrication and installation of mirrors and glass splashbacks
Relevant Australian Standards, including minimum proximity of glass splashbacks to gas cooking appliances
Assessors must:
hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors
have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification
be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.
Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.
Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.
Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.
Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.
Access is required to mirror and splashback specifications, mirrors, aluminium framing material, toughened glass for splashbacks, splashback finishing materials and equipment, fixing/fasteners, workplace operating procedures and word orders, personal protective equipment and an appropriate work area.