List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Identify automated curtain pleating equipment controls and work procedures | 1.1 | Location and function of the equipment, including, equipment condition, components and controls, are identified |
| 1.2 | Work procedures and documentation are checked to identify that settings are within approved operating range |
| | 1.3 | Inspection procedure for quality requirements for hemmed and seamed curtain drops is identified |
| | 1.4 | Heading type is recognised to identify personal work requirements for measuring, calculating, folding and finishing |
| | 1.5 | The process for obtaining materials and moving products to the next process is identified |
2 | Prepare for work | 2.1 | Work order requirements are identified |
| | 2.2 | Work health and safety (WHS) requirements, including ergonomic criteria and personal protection needs, are observed throughout the work |
| | 2.3 | Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition |
| | 2.4 | Work sequence is planned to suit job |
| | 2.5 | Equipment on/off switches and guards are identified |
| | 2.6 | Pleated width for the curtain order is calculated |
| | 2.7 | Adjustments to equipment settings to match work order heading requirements and finished curtain width are made following workplace approved procedures |
| | 2.8 | Any required supplementary equipment is identified for routine cleaning, lubrication and adjustments |
3 | Operate automated curtain pleating equipment | 3.1 | Lubrications and adjustments are made to the machine |
| 3.2 | Curtains are spread on work area and clamped in the automated equipment ensuring a smooth and square alignment with the machine guides |
| | 3.3 | Curtain pleating is completed, monitoring equipment conditions and drape quality |
| | 3.4 | Finished width of each curtain drop is measured and checked against work order and pleat size is adjusted, where required |
| | 3.5 | Curtain headings are stapled or clipped within required heading area |
| | 3.6 | Problems are identified and reported following workplace procedures |
4 | Complete work | 4.1 | Finished work is despatched to next process following workplace procedures |
| | 4.2 | Equipment and work area clean up are completed following workplace procedures |
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Identify materials used in the work process
Follow work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to goods, equipment and products
maintain required production output and product quality
Set up automated curtain pleating equipment to produce at least three (3) different heading types
Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements
Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures
Avoid backtracking, work flow interruptions or wastage
Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity
Types, characteristics, uses and limitations of curtain pleating equipment
Characteristics of materials used and products produced
Identification of equipment adjustment points, processes and procedures
Procedure for reporting faulty products or interruptions to work flow
Work flow requirements for process
Assessors must:
hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors
have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification
be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.
Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.
Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.
Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.
Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.
Access is required to automated pleating equipment, operating procedures and unpleated curtains.