List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Establish work requirements and prepare for work | 1.1 | Work order requirements are checked and confirmed |
| 1.2 | Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition |
| | 1.3 | Correct side of fabric, naps, direction of pattern and pattern matches are identified |
| | 1.4 | Fabric is checked for flaws |
| | 1.5 | Appropriate needle types for the fabric are selected and threaded |
2 | Lay out work to be sewn | 2.1 | Work health and safety (WHS) requirements, including ergonomic criteria and personal protection needs, are observed throughout the work |
| | 2.2 | Linings and any interlining materials are laid out and folded ready for sewing |
| | 2.3 | Lining materials are matched and secured |
| | 2.4 | Face fabric is folded, bringing edges to be seamed together to match any pattern and to maintain an appropriate finished length |
| | 2.5 | Pattern matches are kept uniform within drops and across matching sets of blinds |
| | 2.6 | Fabric is held together and, where required, supported with pins or other workplace approved methods |
3 | Stitch seams and form corners | 3.1 | Curtain fabrics are held to allow for the personal right-hand or left-hand preference of the sewer, and manipulation requirements for the bulk and slipperiness of the materials |
| | 3.2 | Machine sewing operations are completed correctly |
| | 3.3 | Finished length and width of each panel are measured and checked against work order and adjusted, where required |
| | 3.4 | Linings and interlinings are attached to back of blind |
| | 3.5 | Corners are folded and formed to match work order or workplace requirements |
| | 3.6 | Hems are completed using the appropriate stitch type and sewing method |
| | 3.7 | Corners are stitched and finished and threads trimmed |
| | 3.8 | Ring placement positions are measured and marked |
4 | Sew gathering materials | 4.1 | Headings and any stitching or slit along vertical gather lines are completed according to the work order |
| | 4.2 | Ends of stitching are secured and any required weights are attached |
5 | Finish work | 5.1 | Finished blinds are checked ensuring stitch length, end finishing and size blinds match work requirements |
| | 5.2 | Work is pressed |
| | 5.3 | Parts of the work which do not comply with work order are repaired |
| | 5.4 | Rings are attached |
| | 5.5 | Gather tapes and gathering lines are pulled up maintaining even fullness in gather and even tension in gathering lines |
| | 5.6 | Headboard is painted, stained or covered with fabric fixed along the board length, corners are mitred and fixed, reducing bulk and ensuring a neat finish |
| | 5.7 | Blinds are fitted to headboard or track and threading completed |
6 | Complete work for next process | 6.1 | Workplace required documentation or reporting is completed |
| | 6.2 | Finished work is folded, protected and despatched following workplace procedures |
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Identify materials used in the work process
Follow work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to goods, equipment and products
maintain required production output and product quality
Identify materials used and any special sewing requirements measure accurately and construct at least two (2) Austrian festoon-style blinds to required size and accuracy
Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements
Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures
Avoid backtracking, work flow interruptions or wastage
Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity
Types, characteristics, uses and limitations of Austrian festoon-style blinds
Design features of the Austrian festoon-style blinds
Fabric types, common faults and inspection procedures
Identification of equipment, processes and procedures for making Austrian festoon-style blinds
Work requirements, including workplace standards
Risks to health from repetitive actions and prevention strategies
Assessors must:
hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors
have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification
be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.
Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.
Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.
Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.
Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.
Access is required to appropriate sewing machine, fabrics, work procedures and/or equipment instructions.