List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Prepare for work | 1.1 | Specifications concerning design, fabrics, accessories and finish are confirmed with designer/customer/client, as required |
| | 1.2 | Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work |
| | 1.3 | Materials, work method and sequence are determined |
| | 1.4 | Suitable work area is selected, prepared and cleaned of any contaminants |
| | 1.5 | Appropriate equipment and tools are selected and checked for safe operation |
| | 1.6 | Furniture frames/foundations are checked for quality of construction, contaminants and appropriateness to specifications, and modified and/or repaired in accordance with workplace procedures |
| | 1.7 | Material panels are checked in terms of quantity, quality, contaminants, size, pattern and consistency |
| | 1.8 | Trims are selected and checked to in terms of quantity, quality, contaminants, size, pattern and consistency |
2 | Fit and apply material | 2.1 | Work pieces are laid out in sequence according to specifications, construction process and workplace procedures |
| | 2.2 | Fabrics are applied to furniture in accordance with enterprise and industry standards |
| | 2.3 | Decorative features are applied to the materials, as required |
| | 2.4 | Material is secured to the foundation using appropriate fixing processes |
| | 2.5 | Finish of applied material is checked against quality standards |
3 | Fit and apply trim and decorative features | 3.1 | Trims and decorative finishes are applied consistent with specifications and workplace procedures |
| | 3.2 | Trims and decorative finishes are checked against quality standards and modified and/or repaired, as required |
| | 3.3 | Final adjustment are made, as required, to ensure finish meets required quality standards |
4 | Complete work | 4.1 | Finished product is packaged, protected and stored in accordance with workplace procedures |
| | 4.2 | Workplace documentation is completed in accordance with procedures |
| | 4.3 | Waste and scrap are collected for disposal/recycling in accordance with workplace procedures |
| | 4.4 | Tools and equipment used are cleaned, inspected for serviceability and stored in accordance with workplace procedures |
| | 4.5 | Equipment is maintained and work area is cleaned in accordance with workplace procedures |
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Identify materials used in the work process
Follow work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to goods, equipment and products
maintain required production output and product quality
As a minimum, fit and apply a final material cover for:
a bedhead using diamond buttoning
a chair using other decorative finishes
Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements
Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures
Avoid backtracking, work flow interruptions or wastage
Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity
Work requirements, including workplace standards
Work flow in relation to applying final material covers to upholstered furniture using decorative techniques
Cover material types and characteristics, common faults and inspection procedures
Types of decorative techniques and their application
Design features of the finished furnishing items
Assessors must:
hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors
have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification
be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.
Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.
Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.
Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.
Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.
Access is required to relevant process equipment and materials.