List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Prepare for work | 1.1 | Identify appropriate specifications and procedures, and discuss any issues or problems with customer and work team |
| 1.2 | Identify hazards and workplace safety requirements |
| 1.3 | Record description of the job, compare with specification and plan work activities |
| 1.4 | Prepare equipment in accordance with job requirements |
|
2 | Perform glass coating operations | 2.1 | Identify, select and prepare appropriate grades of glass, coating materials, abrasives, solutions and finishing agents as appropriate for the job |
| 2.2 | Clean and prepare glass as required for coating operation |
| 2.3 | Perform glass coating operation according to standard procedure |
| 2.4 | Perform post-coating procedures to maintain coated surface |
| 2.5 | Perform coating removal processes |
| 2.6 | Ensure appropriate disposal of all waste |
|
3 | Perform glass grinding operations | 3.1 | Identify and prepare grinding tools as required for procedure |
| 3.2 | Select appropriate abrasives for grinding operations |
| 3.3 | Perform grinding and repairing/re-grinding processes as appropriate |
| 3.4 | Test ground surfaces to ensure they meet compliance requirements |
| 3.5 | Identify and rectify problems that arise during operations |
|
4 | Perform glass finishing operations | 4.1 | Establish finishing requirements for the job |
| 4.2 | Perform finishing procedures as required for job |
|
5 | Maintain a safe work environment | 5.1 | Use established safe work practices and personal protective equipment (PPE) to ensure safety of self and other workers |
| 5.2 | Minimise the generation of wastes |
| 5.3 | Ensure the safe disposal of wastes |
| 5.4 | Clean, care for and maintain work area, equipment and tools |
| 5.5 | Report any hazards or incidents according to workplace procedures |
|
6 | Maintain records | 6.1 | Record data in accordance with workplace requirements |
| 6.2 | Maintain glass apparatus and system equipment logs in accordance with workplace requirements |
| 6.3 | Ensure security and confidentiality of workplace information |
Evidence of competence in this unit must satisfy all of the requirements of the elements and performance criteria, and include demonstration of:
safely performing glass coating operations, including:
cleaning and preparation of glass surfaces
preparing coating solutions
coating/strip coating and dedicated coating
protecting coated surfaces
electroplating
removal/partial removal of coating
metal coating glass surfaces or applying opaque treatments to industry standards
safely performing glass grinding operations, including:
grinding and hand lapping glass to be used in fabrication and for a precision fit
selecting abrasives and metal grinding tools
interpreting specifications for glass-ground joints
testing ground surfaces for leakage
preparing glass stopcocks
safely performing glass finishing operations, including:
cleaning, rinsing and drying
evacuating and sealing
metallising
flame and/or mechanical polishing
following safe work practices and recommended procedures for glass coating, grinding and finishing operations
selecting appropriate grades of glass, coating materials, abrasives and finishing agents for specific jobs
identifying atypical situations or problems and taking appropriate actions
minimising waste
communicating with customers/research team to confirm specifications and timelines and to seek advice or additional information when necessary
recording and reporting work results.
Must provide evidence that demonstrates knowledge of:
use of glassblowing materials, equipment, tools and techniques
chemistry of coating materials and coating process
theoretical and practical principles of materials and processes for glass coating, glass grinding and glass finishing
theory of equipment operation and use
common faults in coating, grinding and finishing operations and methods for control
safety procedures relevant to coating, grinding and finishing operations
waste disposal procedures
relevant hazards, work health and safety (WHS) and environment requirements.
Judgement of competence must be based on holistic assessment of the evidence. Assessment methods must confirm consistency of performance over time, rather than a single assessment event. The timeframe must allow for adequate assessment of operation under all normal and a range of abnormal conditions.
This unit of competency is to be assessed in the workplace or a simulated workplace environment. A simulated workplace environment must reflect realistic operational workplace conditions that cover all aspects of workplace performance, including the environment, task skills, task management skills, contingency management skills and job role environment skills.
Foundation skills are integral to competent performance of the unit and should not be assessed separately.
Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.
Knowledge evidence may be collected concurrently with performance evidence or through an independent process, such as workbooks, written assessments or interviews (provided a record is kept in each case).
This unit of competency may be assessed with:
MSL965001 Design and manufacture glass apparatus and glass systems
MSL965003 Construct, modify and maintain vacuum systems
Holistic assessment methods include:
inspection of examples of glasswork coating, grinding and finishing and workplace documentation completed by the candidate
analysis of the candidate's work records over a period of time to ensure accurate and consistent work is obtained within required timelines
feedback from peers and supervisors
oral/written questioning about properties of glass; glass coating, grinding and finishing operations; quality problems and safe work procedures.
Access is required to instruments, equipment, materials, workplace documentation, procedures and specifications associated with this unit, including, but not limited to:
a scientific glassblowing facility; appropriate safety equipment; materials; safe work procedures; and coating, grinding and finishing methods
bench burner, hand torch, micro torch and ribbon burner, gas supplies and gas economiser
coating solutions and baths
grinding tools and abrasives
hand tools, such as carbon paddles and mandrels, range of forceps, glass tubing gauges, angle setting jigs, calipers, glass support rollers, brass shapers, carbon rods, glass knife, stainless steel gauze, vernier calipers and other measuring tools, and strain viewer
glassworking lathe, mechanical glass cutters and saws, mechanical glass grinding equipment
annealing oven
measuring and recording equipment.
Assessors must satisfy the assessor competency requirements that are in place at the time of the assessment as set by the VET regulator.
The assessor must demonstrate both technical competence and currency.
Technical competence can be demonstrated through:
relevant VET or other qualification/Statement of Attainment AND/OR
relevant workplace experience.
Currency can be demonstrated through:
performing the competency being assessed as part of current employment OR
having consulted with a laboratory about performing the competency being assessed within the last twelve months.