This unit of competency describes the skills and knowledge to monitor civil engineering structures (such as roads, dams, embankments, open cut faces, bridges, tunnels, towers and other concrete/steel erections) to measure their performance, confirm design parameters or measure the effects of improvements or rehabilitation. The unit involves confirming the requirements of the monitoring activities, liaising with site personnel, performing monitoring activities, setting up monitoring equipment, collecting reliable data and reporting results. Personnel are also expected to interpret results in the field, recognise/rectify obvious errors or unexpected results and troubleshoot common problems.

This unit applies to laboratory personnel working in the geotechnical, construction material testing, civil engineering and mining industry sectors.

No licensing or certification requirements exist at the time of publication. However, regulations and/or external accreditation requirements for laboratory operations exist, so local requirements should be checked. Relevant legislation, industry standards and codes of practice within Australia must also be applied.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice	Yes	No	Comments/feedback
Review job request to confirm the purpose and objectives of monitoring activities with supervising staff
Complete all administrative requirements and obtain appropriate approvals/permits
Use barriers and signage to control access to work area in accordance with workplace safety procedures
Remove signage and barriers and reinstate all disturbed surfaces in accordance with workplace procedures
Use safe work procedures and personal protective equipment (PPE) to ensure personal safety and that of others

Assessment Cover Sheet

MSL974027 - Monitor performance of structures

Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MSL974027 - Monitor performance of structures

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: