This unit of competency describes the skills and knowledge to supervise and direct geotechnical site investigations based on observation and testing. The unit involves confirming the scope of the investigation, liaising with site personnel and coordinating geotechnical sampling and testing activities, collecting reliable data and reporting results. Personnel are also expected to interpret results in the field, provide reliable advice to clients, recognise and rectify obvious errors or unexpected results and troubleshoot common problems.

This unit applies to technical officers working in the construction materials testing sector. This unit of competency is typically performed by experienced technicians or engineering paraprofessionals, who often supervise, or direct less experienced technical personnel.

No licensing or certification requirements exist at the time of publication. However, regulations and/or external accreditation requirements for laboratory operations exist, so local requirements should be checked. Relevant legislation, industry standards and codes of practice within Australia must also be applied.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice	Yes	No	Comments/feedback
Identify the job, consult with stakeholders and obtain relevant information, including the purpose and scope of the investigation
Consult with project personnel to determine methods of communication, roles, responsibilities and expectations of each party, including identification of potential problems and conflicts
Ensure sampling and testing is conducted in accordance with project requirements
Report test results to site superintendent at specified intervals
Record entries on report forms or into a laboratory information management system accurately calculating, recording or transcribing data as required
Promote the use of safe work procedures and personal protective equipment (PPE)

Assessment Cover Sheet

MSL975051 - Supervise geotechnical site investigations

Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MSL975051 - Supervise geotechnical site investigations

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: