List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Prepare for site inspection | 1.1 | Obtain and use maps, photos and related documentation to gain a preliminary understanding of site features. |
| 1.2 | Collect site-specific or regional data on expected flora, fauna, soils and climate. |
| 1.3 | Review site history and previous environmental or ecological studies, if available. |
| 1.4 | Review all emergency plans, risk assessments, and safety and environmental management requirements associated with the field activities. |
| 1.5 | Review legislative and planning instruments applicable to current and future site usage. |
| 1.6 | Confirm site access requirements and identify potential site hazards. |
|
2 | Conduct initial site survey | 2.1 | Sketch, map and/or photograph the site. |
| 2.2 | Observe and record the surface geology and geomorphology of the site. |
| 2.3 | Observe and record hydrology of the site. |
| 2.4 | Observe and record the major flora of the site. |
| 2.5 | Observe and record evidence of site fauna. |
| 2.6 | Observe and record infrastructure and other modifications to the site. |
| 2.7 | Consider the potential for presence of cultural and indigenous heritage items and record, as necessary. |
| 2.8 | Check for evidence of illegal or inappropriate activities. |
|
3 | Make an initial assessment of site condition | 3.1 | Use geomorphological and hydrological observations to describe surface condition and infer potential future impacts. |
| 3.2 | Make inferences on apparent ecological health of the site to plan for an initial ecological study of the site. |
| 3.3 | Determine the physical, chemical and biological parameters that would need to be measured and/or sampled during subsequent ecological appraisal of the site. |
|
4 | Prepare for field study | 4.1 | Identify and describe the biological and chemical components of interest, sampling areas and field techniques to be used. |
| 4.2 | Identify, obtain and check required equipment and materials required for field study. |
| 4.3 | Securely stow all field equipment in vehicle to prevent damage in transit. |
| 4.4 | Safely transport all field equipment to site and prepare it for use. |
|
5 | Perform a basic ecological field study of the site | 5.1 | Perform ecological sampling for abundance and diversity parameters using the general techniques of transects and quadrats. |
| 5.2 | Record appropriate descriptions of the habitat structure. |
| 5.3 | Perform sampling for simple population, demographic and age structure parameters. |
| 5.4 | Perform simple sampling and measurements on abiotic components. |
| 5.5 | Perform simple targeted species sampling. |
| 5.6 | Ensure compliance with relevant legislation, policy, codes of practice and accepted workplace procedures. |
|
6 | Finalise field study | 6.1 | Ensure all samples and data are stored safely. |
| 6.2 | Rehabilitate sampling sites to render them safe and minimise environmental impacts. |
| 6.3 | Clean all equipment, containers, work area and vehicles according to workplace procedures. |
| 6.4 | Pack and safely transport all samples, equipment and supplies back to home base. |
| 6.5 | Ensure dispatch of collected samples for subsequent analysis, as necessary. |
| 6.6 | Check serviceability of all equipment before storage. |
|
7 | Process and present field data | 7.1 | Summarise field data using simple calculations, graphs, tables and/or maps. |
| 7.2 | Provide reports that include simple conclusions and interpretations based on raw or summarised data. |
|
8 | Maintain a safe work environment | 8.1 | Use defined safe work practices and personal protective equipment (PPE) to ensure personal safety and that of others. |
| 8.2 | Minimise the generation of waste. |
| 8.3 | Ensure the safe collection of all hazardous wastes for appropriate disposal. |
Evidence of competence in this unit must satisfy all of the requirements of the elements and performance criteria, and include demonstration of:
planning and conducting at least one (1) site appraisal that involves an initial survey and assessment of site condition and a basic ecological field study
applying relevant aspects of environmental legislative and planning framework to site appraisal
interpreting emergency, safety or environmental management plan requirements and procedures for conducting site inspections, surveys and ecological field studies
researching, reviewing and summarising site information, including its environmental history
accurately observing and recording the site’s significant features, including the ability to ‘step back’ and carefully consider observations and inferences
assessing site condition and determining relevant parameters to be measured/sampled during ecological field study
planning and conducting an ecological study to obtain relevant and reliable data
setting-up, calibrating and using instruments and equipment under laboratory and field conditions
applying specified methods and data quality procedures to accurately perform field sampling and measurements
applying a working knowledge of relevant terminology, concepts and principles in geology, geomorphology, hydrology and ecology to provide a scientific, systematic appraisal of site environmental condition
seeking advice when issues/problems are beyond scope of competence/responsibility
using clear and concise verbal communication to convey information and avoid or resolve work conflicts
preparing concise and accurate reports that contain simple conclusions and interpretations based on raw or summarised data
following procedures for working safely, transporting and storing equipment, minimising environmental impacts and responding to emergency incidents and accidents.
Must provide evidence that demonstrates knowledge of:
scientific terminology for environmental and ecological systems relevant to job role
fundamental concepts and principles in chemistry, physics, geology and biology to support a scientific approach to basic field ecology, including:
structure of earth systems, including lithosphere, hydrosphere, atmosphere and biosphere (ecosphere)
geomorphology, climate and hydrology
energy and material flows and cycles, including biogeochemical cycles
fundamentals of ecology, including:
ecosphere, biome and major ecosystem types
trophic structure of ecosystems, and hierarchies
organism, population, community, ecosystem hierarchy; habitat and biodiversity
abiotic and biotic components and their interrelationships and dependencies
ecological systems and dynamics; stability, succession and disruption
specific legislation, policies and codes of practice related to ecological field activities
ecological, chemical and physical field monitoring procedures relevant to job role
procedures for maintaining, storing and transporting samples/specimens to ensure their wellbeing, viability and integrity
relevant hazards; health, safety and environment requirements, including field safety/survival principles.
Judgement of competence must be based on holistic assessment of the evidence. Assessment methods must confirm consistency of performance over time, rather than a single assessment event.
This unit of competency is to be assessed in the workplace, or a simulated workplace environment. A simulated workplace environment must reflect realistic operational workplace conditions that cover all aspects of workplace performance, including the environment, task skills, task management skills, contingency management skills and job role environment skills.
Foundation skills are integral to competent performance of the unit and should not be assessed separately.
Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.
Knowledge evidence may be collected concurrently with performance evidence or through an independent process such as workbooks, written assessments or interviews (provided a record is kept in each case).
Holistic assessment methods include:
review of data, results and site reports prepared by the candidate
feedback from supervisors that the candidate consistently follows workplace procedures when conducting site appraisals; works safely; accurately observes site features; and produces work outputs within agreed timeframes
review of candidate’s responses to simulated emergency incidents, accidents and/or field survival scenarios
oral and/or written questions to assess the candidate’s understanding of scientific terminology, concepts and principles associated with appraising the environmental condition of sites; regulations and workplace procedures associated with field activities; sampling and measurement methods; and interpretation of site observations
observation of the candidate conducting site appraisals.
Access is required to all instruments, equipment, materials, workplace documentation, procedures, and specifications associated with this unit, including, but not limited to:
access to suitable sites and a vehicle
survey equipment, sampling/monitoring equipment, cameras, consumables, maps and flora/fauna keys
documentation, including site information, environmental management plans, codes of practice and field protocols, equipment manuals, workplace procedures and test/survey methods.
Assessors must satisfy the assessor competency requirements that are in place at the time of the assessment as set by the VET regulator.
The assessor must demonstrate both technical competency and currency.
Technical competence can be demonstrated through:
relevant VET or other qualification/Statement of Attainment AND/OR
relevant workplace experience
Currency can be demonstrated through:
performing the competency being assessed as part of current employment OR
having consulted with an organisation providing environmental monitoring, management or technology related services about performing the competency being assessed within the last twelve months.