List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Determine job requirements | 1.1 | Follow standard operating procedures (SOPs) |
| 1.2 | Comply with work health and safety (WHS) requirements at all times |
| 1.3 | Use appropriate personal protective equipment (PPE) in accordance with SOPs |
| 1.4 | Identify job requirements from specifications, drawings, job sheets or work instructions |
|
2 | Install automatic process and machine control program | 2.1 | Select appropriate program loading technique and connect external loading devices to automatic process and machine control system correctly |
| 2.2 | Place process and machine control system in correct operational mode to accept program loading |
| 2.3 | Download program in accordance with manufacturers' recommended procedure, workplace procedures or appropriate SOPs and WHS practices |
| 2.4 | Undertake checks appropriately during and after downloading to ensure data transfer is accurate and complete |
| 2.5 | Disconnect all external program loading devices and connections from process and machine control system |
|
3 | Commission automatic process and machine control program | 3.1 | Determine program format and operational intent |
| 3.2 | Check program instructions for compliance with specifications |
| 3.3 | Counter-set software timers to specification, where required |
| 3.4 | Step through program manually and check and measure outputs for compliance with specifications |
| 3.5 | Check external inputs for compliance with specifications according to specified procedures |
| 3.6 | Run program and check total operation for compliance with specifications, where applicable |
| 3.7 | Assess confirmation of program master copy storage |
|
4 | Maintain records | 4.1 | Maintain records and prepare reports, where necessary, in accordance with workplace procedures |
Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria, and include:
reading and following work instructions, standard operating procedures (SOPs), safe work practices
applying relevant standards
installing automatic process and machine control program
selecting and using appropriate loading technique
performing checks to ensure accurate data transfer
commissioning automatic process and machine control program
checking program instructions
running program to ensure compliance with specifications
monitoring performance
maintaining accurate records
following workplace procedures.
Evidence must be provided that demonstrates knowledge of:
safe work practices and procedures and use of personal protective equipment (PPE)
relevant Australian Standards
appropriate installation and commissioning procedures
quality requirements and relevant standards
machine and equipment manufacturer specifications and instructions
safety and environmental aspects of relevant workplace activities
quality practices
workplace procedures
recording and reporting practices.
Assessors must:
satisfy the assessor competency requirements that are in place at the time of the assessment, as set by the VET regulator
have vocational competency in installing and commissioning process and machine control systems, at least to the level being assessed, with relevant industry knowledge and experience.
Assessment should occur in operational workplace situations. Where this is not possible, or where personal safety or environmental damage are limiting factors, assessment must occur in a sufficiently rigorous simulated environment reflecting realistic operational workplace conditions. This must cover all aspects of workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills.
Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.
Conditions for assessment must include access to all tools, equipment, materials and documentation required, including relevant workplace procedures, product and manufacturing specifications associated with this unit.
The unit is applicable to all TCF sectors and assessment must ensure it is delivered to suit the industry it is being applied to.