List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Prepare to translate information into measurements or diagrams | 1.1 | Identify customer requirements from customer information |
| 1.2 | Review customer information to ensure all required data is available |
| 1.3 | Seek additional information, as needed |
| 1.4 | Locate and interpret technical information about products, materials, equipment and operating procedures, as required, for processing customer request |
| 1.5 | Follow workplace procedures and instructions |
|
2 | Identify components, products and services | 2.1 | Develop concept of completed product or service |
| 2.2 | Determine required accessories, attachments and other components |
| 2.3 | Determine anchor points, and types and sizes of openings |
| 2.4 | Identify potential difficulties or hazards associated with manufacture of the product or provision of the service |
| 2.5 | Identify environmental features, regulations, insurance requirements, legal requirements and other factors which may affect the product or service to be provided |
|
3 | Develop graphical information to help define customer requirements | 3.1 | Apply knowledge of customer requirements to produce freehand sketches or diagrams illustrating the customer's requirements |
| 3.2 | Transfer dimensions and angles on to the sketch or diagram accurately |
| 3.3 | Mark out positions of attachments, openings, fittings or inserts accurately and clearly |
| 3.4 | Show positions of ropes, struts, retractors or supports clearly |
| 3.5 | Develop and incorporate details of gussets, pockets, hips and other features in the sketches, diagrams or drawings |
| 3.6 | Calculate dimensional allowances for cutting, rolled edges, joins and reinforcements, and incorporate in the sketches, diagrams or drawings |
| 3.7 | Make provision for seams, joins and overlaps and check all dimensions and angles are accurate |
| 3.8 | Use tools, equipment and resources to WHS practices |
| 3.9 | |
|
4 | Finalise information | 4.1 | Prepare final sketches, diagrams and drawings manually or using computer-aided design (CAD) system to confirm customer requirements and provide feedback to customer |
| 4.2 | Store information, sketches, diagrams and drawings according to workplace procedures |
| 4.3 | Pass on graphical information to personnel within the organisation responsible for further action |
Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria, and include:
reading and following work instructions, standard operating procedures (SOPs), safe work practices and other reference material
applying relevant standards
locating and interpreting technical information about products, materials, equipment and operating procedures
complying with all relevant safety requirements, including safe use of measuring tools (including laser devices) and other equipment
conceptualising customer needs from customer information
interpreting specifications and instructions for products and materials offered to customers, and translating ideas into basic 3-D sketches and drawings for at least three (3) products
clarifying customer instructions and providing feedback to customer
making calculations and allowances as required to create accurate final drawings and diagrams for at least two (2) products, using manual or computer-aided design (CAD) programs to produce drawings, where possible
documenting and communicating work related information
applying workplace procedures.
Evidence must be provided that demonstrates knowledge of:
safe work practices and procedures and use of personal protective equipment (PPE)
relevant Australian Standards
a range of common products and services offered by the workplace
general operating principles of common products and equipment on offer
common types of materials used in the industry and their applications
limitations of canvas and other materials used
common types of strengthening and fastenings
measuring instruments and techniques
mathematical processes
plane geometry and plane geometrical shapes
mathematical formulae (e.g. areas and volumes)
engineering drawing principles and practices
environmental requirements of relevant industry and workplace procedures
general industry housekeeping policies and procedures
work health and safety (WHS) practices, including hazard identification and control measures
quality practices
workplace procedures
recording and reporting practices.
Assessors must:
satisfy the assessor competency requirements that are in place at the time of the assessment, as set by the VET regulator
have vocational competency in translating information into measurements or diagrams, at least to the level being assessed, with relevant industry knowledge and experience.
Assessment should occur in operational workplace situations. Where this is not possible, or where personal safety or environmental damage are limiting factors, assessment must occur in a sufficiently rigorous simulated environment reflecting realistic operational workplace conditions. This must cover all aspects of workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills.
Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.
Conditions for assessment must include access to all tools, equipment, materials and documentation required, including relevant workplace procedures, product and manufacturing specifications associated with this unit.