List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Determine job requirements | 1.1 | Follow standard operating procedures (SOPs) |
| 1.2 | Comply with work health and safety (WHS) requirements at all times |
| 1.3 | Use appropriate personal protective equipment (PPE) in accordance with SOPs |
| 1.4 | Identify job requirements from specifications, drawings, job sheets or work instructions |
|
2 | Set up and load dry laid web forming machine | 2.1 | Check specifications to identify requirements for production |
| 2.2 | Check raw materials, containers and quantities |
| 2.3 | Adjust machine settings to meet product requirements |
| 2.4 | Clean area around machine during and on completion of setting and loading |
|
3 | Operate and monitor dry laid web forming machine | 3.1 | Start and stop dry laid web forming machine according to manufacturer instructions and job requirements |
| 3.2 | Monitor machine operations to ensure safe and correct operation |
| 3.3 | Sort waste and clean machine when required |
| 3.4 | Identify, correct and report minor product, process and machine faults, where necessary, to meet specified requirements |
| 3.5 | Operate machine according to WHS and workplace practices and report major machine faults |
|
4 | Check quality and complete dry laid web forming operations | 4.1 | Check formed web against quality standards and production requirements |
| 4.2 | Identify, rectify or report web faults and non-conformances |
| 4.3 | Despatch dry laid web to next manufacturing or packing process |
| 4.4 | Clean area to maintain a safe and productive work environment |
| 4.5 | Complete production records |
Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria on at least two occasions and include:
reading and following work instructions, standard operating procedures (SOPs), safe work practices and other reference material
applying relevant standards
checking machine safety equipment and reporting any faults
preparing materials for web forming
loading and unloading materials
starting and stopping dry laid web forming machines according to specifications on at least two (2) occasions
monitoring machine operations, including machine production readings, on at least two (2) occasions
recognising, rectifying and reporting machine faults or problems as required
maintaining clean machines and work environment, as required
undertaking quality checks and recognising and responding to faulty product
applying workplace procedures
maintaining accurate records.
Evidence must be provided that demonstrates knowledge of:
safe work practices and procedures and use of personal protective equipment (PPE)
relevant Australian Standards
fibre types, including:
rayon and other cellulosics
nylon
polyester
polypropylene
cotton
wool
glass
bi-component
fibre characteristics, including:
absorbency
abrasion resistance
modulus
web 'handle'
moisture absorption
chemical and temperature resistance
melting point
fibre measuring units, including decitex and denier and fibre diameter - equation
fibre or filament crimp
advantages of fibre opening and blending:
component independent system
guarantee a homogeneous mixture
constant performance
flexible operation
high degree of automation
working and stripping principles of carding
different types of carded webs, such as:
parallel laid web
parallel laid web with spreading device
parallel laid web with scrambling
random laid web
random laid web with scrambling
layered and cross laid webs
WHS practices, including hazard identification and control measures
quality practices
workplace procedures
recording and reporting practices.
Assessors must:
satisfy the assessor competency requirements that are in place at the time of the assessment, as set by the VET regulator
have vocational competency in setting up and operating a dry laid web forming machine, at least to the level being assessed, with relevant industry knowledge and experience.
Assessment should occur in operational workplace situations. Where this is not possible, or where personal safety or environmental damage are limiting factors, assessment must occur in a sufficiently rigorous simulated environment reflecting realistic operational workplace conditions. This must cover all aspects of workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills.
Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.
Conditions for assessment must include access to all tools, equipment, materials and documentation required, including relevant workplace procedures, product and manufacturing specifications associated with this unit.